2009+ Lancer RalliArt Sedan & RA Sportback Wheels/Tires Fitment
#1111
Evolved Member
iTrader: (7)
2012 Lancer GT (stock wheel specs: 205/60/16).
Tires: 225/45/18 or 225/40/18 (which one is most recommended? might lower)
XXR522 18x8.5 +30 or 18x8.5 +48
What will fit? Thanks. (not sure if these specs have been posted but the GT has the same stock specs as the previous years ES and DE).
Tires: 225/45/18 or 225/40/18 (which one is most recommended? might lower)
XXR522 18x8.5 +30 or 18x8.5 +48
What will fit? Thanks. (not sure if these specs have been posted but the GT has the same stock specs as the previous years ES and DE).
With those wheels, you'll need the +30 offset to clear the inner suspension, but that will also mean you'll probably need to roll your rear wheel well lips to prevent rubbing.
Otherwise the +48 will require spacers to fit, but you can get smaller spacers and with the 225 tire you may not have to do any fender rolling.
#1113
Hi All
I have some question about the wheel for Lancer Sportback.
1. I want to buy the Weds Sport TC105N, 18x8J, INSET 42, 5Hx114.3, FACE TYPE R
some topic seems have some rubbing issue when INSET around 40.
Have any one install the same specification wheel?
Or, can any one told me this wheel is well for Lancer Sportback?
2. I have a EVO Brembo on hand, but, can the TC105N clear Brembo?
Thanks a lot.
I have some question about the wheel for Lancer Sportback.
1. I want to buy the Weds Sport TC105N, 18x8J, INSET 42, 5Hx114.3, FACE TYPE R
some topic seems have some rubbing issue when INSET around 40.
Have any one install the same specification wheel?
Or, can any one told me this wheel is well for Lancer Sportback?
2. I have a EVO Brembo on hand, but, can the TC105N clear Brembo?
Thanks a lot.
#1114
i'm looking to to get 18x8.5 wheels with 235/40R18 wheels. I'm quite sure that i need to roll the fenders but just wanted to be sure that this fitment does fit my ralliart. My ralliart is also lowered by 1.5''.
#1115
Evolving Member
yes these will fit, very similar to evo x wheels 18x8.5 +38 w 235/40 tires. i ran same setup but lowered on teins. yes you would need just a roll on the rears to be safe. whats the offset?
#1116
Evolved Member
iTrader: (7)
Hi All
I have some question about the wheel for Lancer Sportback.
1. I want to buy the Weds Sport TC105N, 18x8J, INSET 42, 5Hx114.3, FACE TYPE R
some topic seems have some rubbing issue when INSET around 40.
Have any one install the same specification wheel?
Or, can any one told me this wheel is well for Lancer Sportback?
2. I have a EVO Brembo on hand, but, can the TC105N clear Brembo?
Thanks a lot.
I have some question about the wheel for Lancer Sportback.
1. I want to buy the Weds Sport TC105N, 18x8J, INSET 42, 5Hx114.3, FACE TYPE R
some topic seems have some rubbing issue when INSET around 40.
Have any one install the same specification wheel?
Or, can any one told me this wheel is well for Lancer Sportback?
2. I have a EVO Brembo on hand, but, can the TC105N clear Brembo?
Thanks a lot.
Like Nas said in the previous comment, verify the offset before purchasing if you want to make absolutely sure no other work is needed (spacers, more fender work, etc)
#1118
Looks like 18x9 +35 is the safe way to go,
Anyone have these : http://www.customwheelsexpress.com/c...ms-p-1864.html
That's my future as soon as I can afford them.
Anyone have these : http://www.customwheelsexpress.com/c...ms-p-1864.html
That's my future as soon as I can afford them.
#1123
Cosmis MR7
I'm looking at cosmis MR7's. I plan to lower on eibach springs (1.6" drop). I don't know much about fitment, but will they fit or what work will need to be done to make them work? MR7 specs are 18x9 +25
#1125