So confused on 2byte setup... need help quick
#1
Evolved Member
Thread Starter
iTrader: (44)
Join Date: Oct 2003
Location: Charleston, WV
Posts: 4,409
Likes: 0
Received 0 Likes
on
0 Posts
So confused on 2byte setup... need help quick
I'm so confused after reading so many things about different roms.
I have an 03 EVO 94170008 ROM.
Here is my MUT Table for the ROM from 94170008.xml. My question here is if my address is right. I see FFFF in all tables with it open in ECUFlash 1.31.1396.
<table name="MUT Table" category="Advanced" address="3f314" type="3D" level="1" scaling="Hex16">
<table name="X" type="Static X Axis" elements="32">
<data>-</data>
<data>0</data>
<data>-</data>
<data>1</data>
<data>-</data>
<data>2</data>
<data>-</data>
<data>3</data>
<data>-</data>
<data>4</data>
<data>-</data>
<data>5</data>
<data>-</data>
<data>6</data>
<data>-</data>
<data>7</data>
<data>-</data>
<data>8</data>
<data>-</data>
<data>9</data>
<data>-</data>
<data>A</data>
<data>-</data>
<data>B</data>
<data>-</data>
<data>C</data>
<data>-</data>
<data>D</data>
<data>-</data>
<data>E</data>
<data>-</data>
<data>F</data>
</table>
<table name="Y" type="Static Y Axis" elements="16">
<data>0</data>
<data>1</data>
<data>2</data>
<data>3</data>
<data>4</data>
<data>5</data>
<data>6</data>
<data>7</data>
<data>8</data>
<data>9</data>
<data>A</data>
<data>B</data>
<data>C</data>
<data>D</data>
<data>E</data>
<data>F</data>
</table>
</table>
Ok so that my be my main problem right now.
Another thing is EvoScan 1.0 Alpha (downloaded an hour ago). Are there still problems with using 2byte (high readings) with this version? I am getting a reading for load and rpm but they values are very high. 2741.875 load for example.
I'm trying to get the car tune tonight... if anyone could help out that would be awesome!
I have an 03 EVO 94170008 ROM.
Here is my MUT Table for the ROM from 94170008.xml. My question here is if my address is right. I see FFFF in all tables with it open in ECUFlash 1.31.1396.
<table name="MUT Table" category="Advanced" address="3f314" type="3D" level="1" scaling="Hex16">
<table name="X" type="Static X Axis" elements="32">
<data>-</data>
<data>0</data>
<data>-</data>
<data>1</data>
<data>-</data>
<data>2</data>
<data>-</data>
<data>3</data>
<data>-</data>
<data>4</data>
<data>-</data>
<data>5</data>
<data>-</data>
<data>6</data>
<data>-</data>
<data>7</data>
<data>-</data>
<data>8</data>
<data>-</data>
<data>9</data>
<data>-</data>
<data>A</data>
<data>-</data>
<data>B</data>
<data>-</data>
<data>C</data>
<data>-</data>
<data>D</data>
<data>-</data>
<data>E</data>
<data>-</data>
<data>F</data>
</table>
<table name="Y" type="Static Y Axis" elements="16">
<data>0</data>
<data>1</data>
<data>2</data>
<data>3</data>
<data>4</data>
<data>5</data>
<data>6</data>
<data>7</data>
<data>8</data>
<data>9</data>
<data>A</data>
<data>B</data>
<data>C</data>
<data>D</data>
<data>E</data>
<data>F</data>
</table>
</table>
Ok so that my be my main problem right now.
Another thing is EvoScan 1.0 Alpha (downloaded an hour ago). Are there still problems with using 2byte (high readings) with this version? I am getting a reading for load and rpm but they values are very high. 2741.875 load for example.
I'm trying to get the car tune tonight... if anyone could help out that would be awesome!
#2
Evolved Member
Thread Starter
iTrader: (44)
Join Date: Oct 2003
Location: Charleston, WV
Posts: 4,409
Likes: 0
Received 0 Likes
on
0 Posts
Ok here is a pic of my MUT table (that probably isnt using the right address). I've circled what I'm trying to do. If someone can hook me up with getting this all setup along with the evoscan xml entries I'll gladly paypal u 10$. I would give more if I had it right now
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post