need Evo 9 owner to test rear O2 *heater* sim patch
Jan 26, 2009, 10:01 AM
#19
Evolved Member
iTrader: (26)
Join Date: Oct 2005
Location: Pittsburgh
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
I have a friend that removed his rear O2 - he is 88590015. For now he is driving around with a cel, i could probably test this for you on his car. I originally told him to do the resistor mod, but now that I see this he will be happy of the option.
- Trav
- Trav
Jan 26, 2009, 07:26 PM
#21
Newbie
Join Date: Jan 2009
Location: Denmark - Europe
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Hi folks.
I am newbi into EVO and I am not shure that I understand the problem.
During my work with the old ATR I found a nice and cheap solution to aviord MIL (CEL) when you remove a catalysator or place a highflow catalysator.
Now I had used the same solution on my IX. Extending the mounting soket to 4cm will keep the O2 sensor out of the gas stream and no MIL (CEL) will occur.
Guess that you guys know this and you need the programming solution.
I am newbi into EVO and I am not shure that I understand the problem.
During my work with the old ATR I found a nice and cheap solution to aviord MIL (CEL) when you remove a catalysator or place a highflow catalysator.
Now I had used the same solution on my IX. Extending the mounting soket to 4cm will keep the O2 sensor out of the gas stream and no MIL (CEL) will occur.
Guess that you guys know this and you need the programming solution.
Jan 26, 2009, 07:42 PM
#22
We're discussing a solution that permits you to completely remove the rear O2 sensor from the car; ie. completely unplugged from the wiring harness. The mechanical solution you mentioned is workable for those who can retain the sensor, but isn't ideal for all of us.
