need Evo 9 owner to test rear O2 *heater* sim patch
Jan 26, 2009, 06:50 AM
#1
need Evo 9 owner to test rear O2 *heater* sim patch
With a bit of help from acamus, I now understand the rear O2 heater OBD-II test algorithm enough to write a patch to simulate the rear O2 heater status so that the rear O2 sensor can be removed entirely. I need some help testing the patch though because my rear O2 sensor is still installed. I need an Evo 9 owner who has removed their rear O2 sensor, is not running the resistor mod, and has time to help me test a patch. Thanks.
MR Turco Update:
MR Turco Update:
That's actually rather clever. 
I like, especially if tephra was going to include it. For grins, I looked up 96940011, though, and it's a little different (although not so much that the same trick wouldn't work):
Honestly, I think it's probably just easier for folks who need this to just NOP the jsr to the test routine, and call it a day, unless tephra's going to include this as a tweakable item.
So, to summarize so far, here's a minimal addition for your XML:
96530006:
96940011:
88590015:
94170015:
Open up the ROM, navigate to the "Mods" section, change "Rear O2 Heater Patch" from "4A0B" to "0009", and you should no longer throw a rear O2 heater code. Change it back to get your CEL back. 
EDIT: I originally posted a typo in the address for 96940011.
I like, especially if tephra was going to include it. For grins, I looked up 96940011, though, and it's a little different (although not so much that the same trick wouldn't work): Code:
loc_2E722: ! CODE XREF: sub_2E678+A2
mov.l @(0x13C,pc), r10 ! [0002E860] = unk_FFFF8A10
mov.w @r10, r10
extu.w r10, r10
tst r8, r10
bt loc_2E732
mov.l @(0xE8,pc), r10 ! [0002E818] = sub_32780
jsr @r10 ! sub_32780
nop
So, to summarize so far, here's a minimal addition for your XML:
96530006:
Code:
<table name="Rear O2 Heater Patch" category="Mods" address="2c62a" type="1D" scaling="Hex16" />
Code:
<table name="Rear O2 Heater Patch" category="Mods" address="2e72e" type="1D" scaling="Hex16" />
Code:
<table name="Rear O2 Heater Patch" category="Mods" address="2db04" type="1D" scaling="Hex16" />
Code:
<table name="Rear O2 Heater Patch" category="Mods" address="2c48e" type="1D" scaling="Hex16" />
EDIT: I originally posted a typo in the address for 96940011.
Last edited by MR Turco; Mar 21, 2010 at 01:03 PM.
Jan 26, 2009, 08:09 AM
#5
Evolved Member
iTrader: (6)
Join Date: Jul 2005
Location: Charleston, SC
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
I have a local guy here that would most likley let me try it on his car. I would just unplug the O2 and install the patch. I will have to check his availability today.
Jan 26, 2009, 08:38 AM
#6
If you are reasonably confident in it I can unplug within the next week (man, next weekend is going to be busy with sports ! ). I'll keep an eye on the thread if no one else volunteers, but feel free to post/pm/email it to me so I can fire it up if I have a minute....
). I'll keep an eye on the thread if no one else volunteers, but feel free to post/pm/email it to me so I can fire it up if I have a minute....
Jan 26, 2009, 08:39 AM
#7
I'm still undecided about exactly how I'll implement the patch, so I need someone who doesn't mind having their rear O2 heater unplugged for a few days. It would be better to have someone who has already removed the rear O2 sensor because unplugging the O2 sensor without removing it will damage it pretty quickly.
Trending Topics
Jan 26, 2009, 09:00 AM
#12
