Evoscan/tephra v7...
#1
Evolving Member
Thread Starter
Join Date: Mar 2010
Location: Behind a laptop in FLA
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Evoscan/tephra v7...
I normally wouldnt make a thread about this, without searching a bit more...
But thats what threads are for right?...
While logging with evoscan, I make a pull in third to about 8550 rpm...
Evoscan only shows me 7986.... then it stops...? What gives? I keep thinking 2byte rpm or something like that has to be the culpret...
Thanks in advance fellas
But thats what threads are for right?...
While logging with evoscan, I make a pull in third to about 8550 rpm...
Evoscan only shows me 7986.... then it stops...? What gives? I keep thinking 2byte rpm or something like that has to be the culpret...
Thanks in advance fellas
#3
Evolving Member
Thread Starter
Join Date: Mar 2010
Location: Behind a laptop in FLA
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
God i am such an idiot... lol i knew it
hmmm.... just went to the v7 thread and i read this under the mut requests...
Preconfigured MUT Requests
MUT00+MUT01 = 2byte airflow (ie MrFreds mod in g/s or lb/min)
MUT02+MUT03 = 2byte airflow (ie MAFHz)
MUT40 = 1byte gear
MUT41 = 1byte load
MUT42+MUT43 = 2byte SPEED/RPM ratio (to get your gear ratios correct - if you need to)
2byte load AND 2byte RPM are no longer included and IMHO not needed!
So do i have to repatch my rom for 2byte?
hmmm.... just went to the v7 thread and i read this under the mut requests...
Preconfigured MUT Requests
MUT00+MUT01 = 2byte airflow (ie MrFreds mod in g/s or lb/min)
MUT02+MUT03 = 2byte airflow (ie MAFHz)
MUT40 = 1byte gear
MUT41 = 1byte load
MUT42+MUT43 = 2byte SPEED/RPM ratio (to get your gear ratios correct - if you need to)
2byte load AND 2byte RPM are no longer included and IMHO not needed!
So do i have to repatch my rom for 2byte?
Last edited by BillSpec; Mar 21, 2010 at 11:29 AM.
Thread
Thread Starter
Forum
Replies
Last Post
OneEyedJack
ECU Flash
4
Sep 15, 2010 01:10 PM