LM1 not working with EVOSCAN GPS help required
#1
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Nov 2008
Location: Forever with BIG
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
LM1 not working with EVOSCAN GPS help required
Im sure its probably an operator error (ie me) however i cannot get a reading to appear on the gps unit, when connecting it says 2 usb devices found but simply displays nothing.
I have tried connecting the lm1 serial (without usb convertor) output directly to my laptop running windows evoscan 2.6 and it works fine, so im guessing its an issue with the usb-serial convertor needed when using the gps version. Is anything required to log an lm1 via the gps unit? i am using the usb convertor supplied by evoscan.com
Also cant get 2 byte load to display correctly it reads 0 at idle yet reads correctly when logged via windows evoscan v2.6
any ideas as to what im not doing correctly??
other then these 2 issue it is a fantastic unit
I have tried connecting the lm1 serial (without usb convertor) output directly to my laptop running windows evoscan 2.6 and it works fine, so im guessing its an issue with the usb-serial convertor needed when using the gps version. Is anything required to log an lm1 via the gps unit? i am using the usb convertor supplied by evoscan.com
Also cant get 2 byte load to display correctly it reads 0 at idle yet reads correctly when logged via windows evoscan v2.6
any ideas as to what im not doing correctly??
other then these 2 issue it is a fantastic unit
Last edited by infini_IV; Oct 24, 2010 at 04:07 PM.
#2
Silver Sponsor
iTrader: (-1)
LM1, I thought you said you had an LC1? I didn't know that anyone still bought LM1 widebands, everyone uses LC1, its cheaper and better. LM1 has not been tested on EvoScan GPS because I haven't had an LM1 for 3 years. I did borrow an LM1 3 years ago when I first wrote EvoScan v0.99 Perhaps when you are back over my way we can test it and get it running.
My website only has these listed for GPS Nav: Supports ZT2, LC1, AEM
http://www.evoscan.com/mitsubishi-su...bd2-can-cables
Everyone uses 1 Byte Load now. aka "Load" in Evoscan GPS v2.2 it has the full range of load values required for tuning.
My website only has these listed for GPS Nav: Supports ZT2, LC1, AEM
http://www.evoscan.com/mitsubishi-su...bd2-can-cables
Everyone uses 1 Byte Load now. aka "Load" in Evoscan GPS v2.2 it has the full range of load values required for tuning.
Code:
<DataListItem DataLog="N" Color="" Display="Load" LogReference="Load1B" RequestID="41" Eval="1.2*x" Unit="load" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="270" ChartMin="0" ChartMax="270" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
#5
Evolved Member
iTrader: (17)
Join Date: Aug 2004
Location: In da streetz
Posts: 3,275
Likes: 0
Received 0 Likes
on
0 Posts
I have the same issue with LM1 & EvoScan PPC v2.2. Hamish was on my cpu via remote access about a month ago collecting data to fix the bug to allow the LM1 to log. I don't know how far he's gotten since then, but when we last spoke he said it was a pretty easy fix. I just bumped the EVOScan GPS thread with a reminder. Hopefully it won't be too much longer... I really don't feel like buying another wideband.
Trending Topics
#9
Silver Sponsor
iTrader: (-1)
what about connecting the LM1 to the ecu? does it have a 0-5v output you con wire into the ecu?
more links at the bottom of this page:
http://www.evoscan.com/technical-veh...ideband-review
more links at the bottom of this page:
http://www.evoscan.com/technical-veh...ideband-review
Thread
Thread Starter
Forum
Replies
Last Post
evoscan
ECU Flash
1338
Aug 16, 2020 04:22 AM
evo4mad
ECU Flash
1880
May 5, 2015 06:22 PM