immobilizer
#2
Evolved Member
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
This is what I got in my tuning notes:
To disable the immobilizer (ecu periphery0(FAA bit 3)):
56D0 -No rear O2 no Immobilizer
5650-no rear O2, No immobilizer, No knock
5658-no rear O2, No knock sensor
56D8-no rear O2
5698, no front or rear 02
5690, no front 02, rear 02, or immobilizer
56D2, No immobilizer
So open up ecuflash and look at periphery0 and see what your value is...I think from factory its 56DA, so if you want to disable the immobilizer only you need to enter 0x56D2.
To disable the immobilizer (ecu periphery0(FAA bit 3)):
56D0 -No rear O2 no Immobilizer
5650-no rear O2, No immobilizer, No knock
5658-no rear O2, No knock sensor
56D8-no rear O2
5698, no front or rear 02
5690, no front 02, rear 02, or immobilizer
56D2, No immobilizer
So open up ecuflash and look at periphery0 and see what your value is...I think from factory its 56DA, so if you want to disable the immobilizer only you need to enter 0x56D2.
Thread
Thread Starter
Forum
Replies
Last Post
56d2, bits, deactivate, disable, disabling, ecu, ecuflash, evo, evo7, evom, faa, ffff, immobilizer, immobilzer, ix, location, periphery0