mrb00st

I have used the search button, but have kind of came up empty handed. I have a very basic mods, 3" TBE, uicp and licp and a manual bc. I havent ran any logs in on my car in a while. But i did some today and something seemed odd to me. I am currently running 23psi and tappers to 20psi at redline. My load spikes at 330. So i turned the boost down to 20psi and did another run. This time my load was 320. IF that a oddly high load? I have seen a bunch of other ppl saying they have 260-280 load on the same psi i have. All my pulls i normaly do in 3rd gear.

wizzo 8

iTrader: (35)

Usually that means you have a boost leak.

211Ratsbud

iTrader: (1)

^ or a BPV/bov not sealing or plumbed right aswell. Boost leak test asap.

wizzo 8

iTrader: (35)

If you do a boost leak test and don't find a leak you could also have a bad maf sensor

mrb00st

well, i did a boost leak test yesterday. only leaks i could find was at the TB seals. Wasnt anything massive, same as its always been. but i will check again. thanks for ur guys help.