Stock injector battery voltage latency not right?
Apr 30, 2012, 01:02 AM
#1
Newbie
Thread Starter
iTrader: (10)
Join Date: Jan 2010
Location: IN
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Stock injector battery voltage latency not right?
I need help with trying to figure out why injector battery voltage latency table shows these numbers for stock injectors? Also it will not let me adjust ms. Scaling is stock 532.
volts - ms
4.69 3.825
7.03 3.27
9.38 1.695
11.73 1.11
14.07 0.809
16.42 0.57
18.69 0.405
09 Ralliart - 53600010
<table name="Fuel Injector Scaling" address="536cc" category="Fuel" type="1D" scaling="InjectorScaling"/>
<table name="Injector Battery Voltage Latency Compensation" address="556d0" category="Fuel" type="2D" scaling="InjectorLatency">
<table name="Battery Voltage" address="60eb2" type="Y Axis" elements="7" scaling="BatteryVoltage"/>
</table>
<table name="Injector Base Latency" address="53000" category="Fuel" type="1D" scaling="InjectorLatency"/>
Any help is appreciated.
volts - ms
4.69 3.825
7.03 3.27
9.38 1.695
11.73 1.11
14.07 0.809
16.42 0.57
18.69 0.405
09 Ralliart - 53600010
<table name="Fuel Injector Scaling" address="536cc" category="Fuel" type="1D" scaling="InjectorScaling"/>
<table name="Injector Battery Voltage Latency Compensation" address="556d0" category="Fuel" type="2D" scaling="InjectorLatency">
<table name="Battery Voltage" address="60eb2" type="Y Axis" elements="7" scaling="BatteryVoltage"/>
</table>
<table name="Injector Base Latency" address="53000" category="Fuel" type="1D" scaling="InjectorLatency"/>
Any help is appreciated.
Last edited by csra09; Apr 30, 2012 at 01:14 AM. Reason: typo&more info
Apr 30, 2012, 10:27 AM
#4
Newbie
Thread Starter
iTrader: (10)
Join Date: Jan 2010
Location: IN
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Long day and rookie mistake. Still learning figured better to ask. After comparison to a stock evo rom the numbers were different. Searching a older thread comparing tables showed they had the same injector voltage latency in stock form...kinda confused me. Well time to do some more research/reading.
Apr 30, 2012, 02:31 PM
#5
Thanks. Long day and rookie mistake. Still learning figured better to ask. After comparison to a stock evo rom the numbers were different. Searching a older thread comparing tables showed they had the same injector voltage latency in stock form...kinda confused me. Well time to do some more research/reading.
....so it may be because of that. You shouldn't visually compare, just open up the other rom in the same version of ecuflash.
Thread
Thread Starter
Forum
Replies
Last Post
EvocentriK
ECU Flash
4
Jan 22, 2012 03:33 PM
