Flex Fuel testing in TephraXMOD V3
Jan 7, 2017, 02:02 PM
#257
Ecuflash has the wrong axis for this table...
This:
Should be this:
This:
Code:
<table name="Injector Battery Voltage Latency Compensation" address="556d0" scaling="InjectorLatency">
<table name="Battery Voltage" address="6536a"/>
</table>
Code:
<table name="Injector Battery Voltage Latency Compensation" address="556d0" scaling="InjectorLatency">
<table name="Battery Voltage" address="61082"/>
</table>
Now I get one alarm on the X axis "map base load Cal # 1 hot / interpolated"
now the adress for psi is 62c88. (in XML)
Jan 16, 2017, 08:36 PM
#258
Newbie
iTrader: (1)
Join Date: Dec 2006
Location: in my car
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Hello Tephra I have now solved the problem with the address 61082, had to change it directly in romme Data 55570005 2010 USDM Lancer Evolution X 5MT. (XML)
Now I get one alarm on the X axis "map base load Cal # 1 hot / interpolated"
now the adress for psi is 62c88. (in XML)
Now I get one alarm on the X axis "map base load Cal # 1 hot / interpolated"
now the adress for psi is 62c88. (in XML)
Last edited by fas-n-furyus; Feb 22, 2017 at 09:48 AM.
Jan 22, 2017, 08:37 PM
#259
Can anyone go into detail about the differences between the tephra specific map changes between V1 and V3. I have been running 55580106 which installed and worked perfectly. So when I went V3 we went 55580306. I copied over my current tune, loaded it up but the timing and WGDC's are way off. I can't find much to confirm I have the tephra specific maps set up correctly. Any help would be greatly appreciated.
Jan 27, 2017, 10:32 PM
#260
Hi Tephra, I've send you one email to your address myforumnickname@gmail.com. Please advise.
Jan 27, 2017, 10:46 PM
#261
Need advised
Hi Tephra, I've send you one email to your address myforumnickname@gmail.com. Please advise.
is the email address correct?..really need help
Apr 21, 2017, 04:03 AM
#264
Newbie
Join Date: Mar 2011
Location: AUSTRALIA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hi all,
I'm having problems trying to log the ethanol content to get my car ready for V3
I have a zeitronix ECA that i double checked the wiring and everything looks like it's connected to where is should be (pin112 for us aussies), but when i log in evoscan, it shows a value of 95 but my gauge shows 2%. My tank should be very low on e85 so i believe the gauge reading is correct.
I removed the ECA from the equation and disconnected it from the ecu, but logging still returned a value of 95. I also checked the voltage of the analogue output wire, and that read 0.11v and matches the 2% reading on the gauge.
I'm at a loss on where the issue is - maybe i stuffed up in evoscan? here is my evoscan setting.
Any help will be greatly appreciated! Thanks.
I'm having problems trying to log the ethanol content to get my car ready for V3
I have a zeitronix ECA that i double checked the wiring and everything looks like it's connected to where is should be (pin112 for us aussies), but when i log in evoscan, it shows a value of 95 but my gauge shows 2%. My tank should be very low on e85 so i believe the gauge reading is correct.
I removed the ECA from the equation and disconnected it from the ecu, but logging still returned a value of 95. I also checked the voltage of the analogue output wire, and that read 0.11v and matches the 2% reading on the gauge.
I'm at a loss on where the issue is - maybe i stuffed up in evoscan? here is my evoscan setting.
Any help will be greatly appreciated! Thanks.
Last edited by poop2003; Apr 21, 2017 at 04:13 AM.
Jun 8, 2017, 03:39 AM
#266
Hi all, I have had an issue with the launch map function of V3. I am unable to have it switch. I have logged my timing and AFR targets and it is not changing from the standard map. Am I missing a step in activating this or is it not available or the sst. (Rom 56920008) I read other tephra mod threads and changed the max vehicle speed to 8 for launch maps. What else do I do?
Thanks in advance
Thanks in advance
Jul 17, 2017, 12:53 PM
#270
Newbie
Join Date: Jan 2017
Location: Canada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
im looking to purchase v3 for flexfuel options but looks like it doesnt support USDM EvoX MR 2012. any reason why its not supported? will it ever be supported in future? im guesing its a work in progress. tried to PM you but ur inbox full lol, hope to hear from you...
