2byte load for 96420011
#1
Evolving Member
Thread Starter
2byte load for 96420011
Can anyone help me with this i got the MUT table working but there seems to be no definitions for 2 byte load or RPM or airflow for this rom anywhere online its driving me nuts..
So if no one has it can i just use a different 2004 EVO 8 rom and move all my stuff to it such as imob codes and stuff will it even fire up im confused this seems to be the only evo 8 USDM rom with no definitions for this....
PS yes i searched the official 2byte load thread few people asked for it but never got an answer
So if no one has it can i just use a different 2004 EVO 8 rom and move all my stuff to it such as imob codes and stuff will it even fire up im confused this seems to be the only evo 8 USDM rom with no definitions for this....
PS yes i searched the official 2byte load thread few people asked for it but never got an answer
#3
EvoM Guru
iTrader: (1)
Yeah, just move to a 9417 ROM. It'll run fine.
#4
Evolving Member
Thread Starter
Problem is moving to 9417 is the big maps in still learning them and a little afraid I might mess it up I know sounds dumb but not sure if I got it right or not hoping to start learning on just a standard rom and work my way up to big maps and speed density
#6
EvoM Community Team Leader
#7
Evolving Member
Thread Starter
Or is it just the first 2 ?
Trending Topics
#9
Evolving Member
Thread Starter
Yes from what I have read tephra has 2 that you don't touch or the rom changes. I'm wondering about a normal stock rom though though is it all 4 of them I just want to start with a basic stock map that I can get 2 byte load on tune it and move up to tephra big maps
#10
EvoM Community Team Leader
its just immobilizer and immobilizer hex. Shops use to change the init code to "Lock" the ecu.
#12
EvoM Community Team Leader
yah you need the internal id to match the actual rom your using so that your definition file in ecuflash is correct, otherwise it will reference the wrong memory addresses for that rom. So if your using a 94170015 you want to make sure the ID is 94170015 so that ecuflash loads the correct xml definition file.
#14
EvoM Community Team Leader
#15
Evolving Member
Thread Starter
Hmm after flashing it it fires up everything seems good but now my anti lock light flashes with my 1.3u cable plugged in as soon as it's unplugged it goes away is that something Mitsubishi added on later roms.? Doesn't seem to affect anything