SH0F

http://imgur.com/a/xbH0u
<blockquote class="imgur-embed-pub" lang="en" data-id="a/xbH0u"><a href="//imgur.com/xbH0u"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>

on a seep learning curve so just wanted some feedback

I'm guessing theses are original

evo 8 mr

thanks

ronaldo9

iTrader: (2)

Can you post some logs are you experiencing knock? Would you be willing to try tephramod v7. You will have more resolution and can fine tune the map better so you don't have big jumps from cell to cell. The map looks ok but it doesn't tell the whole story, logs would help.

SH0F

Thanks for taking your time to look
I will post some logs as soon as possible. Thing is I don't have my wideband connected yet so will they be any use. Also need to get 3 bar map sensor online.
I get around 3 -6 knock counts higher up the rpm but not consistently .

I want to move over to the tephra soon as I've fitted the above and a 3 port boost solenoid
Was thinking 96260009. As mines 96260007 ATM.

merlin.oz

Make every cell that is richer than 11.1 AFR equal to 11.1 and you will be off to a good start on that high octane map.

And for the low octane map nothing richer than 10.2

SH0F

something like this

http://imgur.com/a/vYrQz


my log

http://imgur.com/a/x8ofx