211Ratsbud

iTrader: (1)

Posted in the other thred

BB fp red with ss housing 3" turbo back
Br 2.4
S2 cams mivec
93 octane 28 psi maybe a little more
Skunk 2 intake manifold ported at stm
Full blown throttle body
Cbrd intercooler

93 octane

Can someone estimate Mustang or dyno jet hp?

EvoIX89

iTrader: (1)

475whp or around that number. on a mustang dyno. I made 486whp on a 2.0 motor same mods, at 30+ psi with an MHI turbine housing red.

4b11slayer

500 hp

Abacus

iTrader: (9)

That housing reduces backpressure but gives up lowend, it should make over 500whp on pump gas.

Its pretty close to a PTE 5858 at that point.

LetsGetThisDone

iTrader: (1)

This, especially with a 2.4L and good 93 octane fuel.

DSM3393

./

HawkeyeGeoff

I'd guesstimate ~500awhp

evo8vz

I made 530 on a 2.3 on pump

Ported CBR I/E Manifold along with throttle

Also with R2 camshaft

TexasLT4

iTrader: (6)

Yeah I'm gonna say 500-530 safely on a DJ. Depends on the tuner though.

Fast_Freddie

iTrader: (50)

Does your Buschur 2.4 use the manley or the wiseco pistons... I had them build mine with wiseco 1400HDs and forgot about the misprint on compression ratio (wiseco)... with the head being decked and no head work, I estimate my comp ratio around 10.2/3:1 so I had to run lower boost and timing... Made around 450HP/440 TQ at 26psi on 93 oct (JB Red, MHI Housing, S2 cams, Ported OEM IM, 65MM TB)... if I were on E85, it would be a different story...