Custom EVO installs
#31
Evolving Member
iTrader: (7)
bumpin an older thread
im trying to figure out if my 13av.2 will fit in my trunk. its currently sleeping in the hatch of my rsx, and i wanted to put it in the evo. the box measurements are 27.3x15.x17.5. i miss having thunderous bass. heres a pic of the system in my rsx:
im trying to figure out if my 13av.2 will fit in my trunk. its currently sleeping in the hatch of my rsx, and i wanted to put it in the evo. the box measurements are 27.3x15.x17.5. i miss having thunderous bass. heres a pic of the system in my rsx:
#38
Hi guys, I bought an EVO9, as far as I remember when the ignition key is in the ignition switch and the driver door is open, a "bim-bam" sound should come up from the dashboard. My car is in silent. Is there any fuse somewhere for this function?
Thx.
Thx.
#39
Evolving Member
I did is a 3 speed cruise control that I control via my GTA steering wheel toggles
Left - Res I set at 50kph for the local side streets
Left + Res I set at 60kph for the 60 street zones
Both of those speeds stay in memory even after turning the car off
Right - is the 3rd speed Set toggle
Right + is the 3rd speed Res toggle
Behind the wheel at 9 o'clock and 3 o'clock, I fitted momentary buttons for coast
Behind at 6 o'clock is my on/off momentary button set as latching for the circuit board
Inside the horn I have 3x 2 button key fobs that I hard wired to the toggles and buttons
The toggles and buttons wirelessly transmit to 3x 2ch receivers that are wired to the unit
It is an electric actuator pulling the accel pedal rod up top
All wiring etc is inside outa sight
Paddle downshift followed by resume cruise ramps up pretty quickly
Left - Res I set at 50kph for the local side streets
Left + Res I set at 60kph for the 60 street zones
Both of those speeds stay in memory even after turning the car off
Right - is the 3rd speed Set toggle
Right + is the 3rd speed Res toggle
Behind the wheel at 9 o'clock and 3 o'clock, I fitted momentary buttons for coast
Behind at 6 o'clock is my on/off momentary button set as latching for the circuit board
Inside the horn I have 3x 2 button key fobs that I hard wired to the toggles and buttons
The toggles and buttons wirelessly transmit to 3x 2ch receivers that are wired to the unit
It is an electric actuator pulling the accel pedal rod up top
All wiring etc is inside outa sight
Paddle downshift followed by resume cruise ramps up pretty quickly
Last edited by GTA.RS; Jun 29, 2020 at 11:59 AM. Reason: txt
Thread
Thread Starter
Forum
Replies
Last Post
03chi-town0Z
09+ Ralliart How-To/Installations
0
May 12, 2011 10:20 AM