Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

FP HTA35r Dyno #’s w/ Meth

Thread Tools
 
Search this Thread
 
Old Feb 10, 2008, 09:37 AM
  #1  
Evolved Member
Thread Starter
iTrader: (29)
 
Freddy302's Avatar
 
Join Date: Mar 2005
Location: CT
Posts: 644
Received 3 Likes on 3 Posts
FP HTA35r Dyno #’s w/ Meth

FP HTA35r Dyno #’s w/ Meth

So I went back to The Shop in Norwalk, CT to see what the HTA could do with pump and Meth on a Dyno Dynmaic’s. First round with just 93 octane, on a conservative tune (zero knock count) and 21 psi was 440 whp and 400 wtrq. I was EXTREMELY happy with these numbers. My car with the green and meth on this dyno made 430hp 415 trq.

https://www.evolutionm.net/forums/showthread.php?t=292893&highlight=green


Now for the good stuff:
Drove to The Shop this rainy Saturday night(off course it’s the place to be . So I turned the boost up from 21 psi to 27 psi to get ready for the meth . And again the HTA put down some impressive #’s!

543 whp but I was even more excited about the 500 wtrq!!

I was worried that the 35r would loose all the torque that the green and smaller turbo are well known for.. But not with this HTA35r and 7psi less then the green!


Well with my old # with the Green (487 whp and 510 trq) https://www.evolutionm.net/forums/showthread.php?t=293801
the car ran and 11.2 @123 my first time out..
https://www.evolutionm.net/forums/showthread.php?t=295501
With another 50 hp I should be in the 10’s around 130 on pump gas w/meth. This is exactly what I was shooting for.. But only one way to confirm once the tracks opens in the Northeast!

All I know is on Pump and Meth This thing is a sick animal! All tuning was done with ECU flash and Mitsulogger (free and free). Thanks to everyone for their help. The Guys at The Shop were awesome, Jimmy for staying open late and Getting me on the dyno between his stage II and IV testing for his 08 STI (which was sick). And Junior for hanging out and giving me an awesome tune! That is extremely safe and conservative and works like a CHAMP!

MODS:
HTA35r w\.63 AR 5 bolt
RNR Manifold w/38 TIAL WG
APS Intake
APS 3inch Complete Exhaust
BF 272 Cams
Stock ECU,MAF, Intake mani and Cylinder Head
2.0 liter
HKS DLII Ignition
Hyperflow Large IC with THE SHOP LICP
SMC Meth Kit with small Jet

Here are the two dyno runs from above..
Attached Thumbnails -hta35r-21psismall.jpg   -hta35r-methsmall.jpg  
Old Feb 10, 2008, 09:41 AM
  #2  
Evolved Member
iTrader: (7)
 
turbodreamz21's Avatar
 
Join Date: Oct 2007
Location: Beverly MA
Posts: 540
Likes: 0
Received 0 Likes on 0 Posts
crazy sutff man im lookign to do 3076r with meth also wiht stock head hopefully i see some good numbers im looking for 500 whp with meth but idk i mgiht have to go bigger turbo gt35r maybe i just dont want a alot fo lag?


do u feel alot of lag evenw ith the .63? where do you hit full boost? 4200?
Old Feb 10, 2008, 09:50 AM
  #3  
Evolved Member
iTrader: (15)
 
FL_SilverEvo8's Avatar
 
Join Date: Oct 2005
Location: Fort Myers, FL
Posts: 1,139
Received 0 Likes on 0 Posts
i was looking for someone to try this out on that HTA GT35R.
nice numbers grats and doing it on a stock ECU flash.
where does full boost come in?
is your block stock or did you put rods and pistions?
you do have ARP head studs right? i hope so.
Old Feb 10, 2008, 09:53 AM
  #4  
Evolved Member
iTrader: (7)
 
turbodreamz21's Avatar
 
Join Date: Oct 2007
Location: Beverly MA
Posts: 540
Likes: 0
Received 0 Likes on 0 Posts
i woudl liek to know this to my caR HAS apr head studs im wondering where you hit the fullb oost ont he car and do u feel alot fo lag?
Old Feb 10, 2008, 09:57 AM
  #5  
Evolved Member
iTrader: (94)
 
EvoDan2004's Avatar
 
Join Date: Feb 2005
Location: New Jersey
Posts: 8,984
Likes: 0
Received 7 Likes on 7 Posts
Originally Posted by turbodreamz21
i woudl liek to know this to my caR HAS apr head studs im wondering where you hit the fullb oost ont he car and do u feel alot fo lag?
translation

i would like to know this too. my car has arp head studs, im wondering where you hit full boost with this setup and do you feel a lot of lag??


idk
Old Feb 10, 2008, 10:01 AM
  #6  
Evolved Member
iTrader: (32)
 
m4tt VIII's Avatar
 
Join Date: Nov 2006
Location: Greenwich, CT
Posts: 793
Likes: 0
Received 1 Like on 1 Post
Well u just made my decision for me. Assuming your just headstuds on your 2.0, my next mod is hta gt35r! The guys at the shop are awesome and I have a junior tune from his ics days. Congrats and thanks for proving this beast
Old Feb 10, 2008, 10:13 AM
  #7  
Evolved Member
iTrader: (24)
 
yellowEVO21's Avatar
 
Join Date: Jan 2005
Location: Central NJ
Posts: 1,353
Likes: 0
Received 0 Likes on 0 Posts
How's the idle with the BF 272 cams on the stock ecu? I'd imagine its pretty choppy.
Old Feb 10, 2008, 10:13 AM
  #8  
Evolved Member
iTrader: (7)
 
turbodreamz21's Avatar
 
Join Date: Oct 2007
Location: Beverly MA
Posts: 540
Likes: 0
Received 0 Likes on 0 Posts
thanks for the corrections but ya im wondering cuz i was thinking of going 3076r but alot of ppl are saying go 35r with meth to hit that 500 whp mark..so now im wondering if the 35r will produce to much lag because i want a everyday car where i can be in traffic and not bog everywhere and still be bale to run 11's at the track


so thats why i am asking either i would go with 3076 or the 35r also i will be getting tuned at ICS so i heard alot of good things about them and how well they tune with the meth kits and bigger turbos
Old Feb 10, 2008, 10:17 AM
  #9  
Evolved Member
iTrader: (94)
 
EvoDan2004's Avatar
 
Join Date: Feb 2005
Location: New Jersey
Posts: 8,984
Likes: 0
Received 7 Likes on 7 Posts
Originally Posted by turbodreamz21
thanks for the corrections but ya im wondering cuz i was thinking of going 3076r but alot of ppl are saying go 35r with meth to hit that 500 whp mark..so now im wondering if the 35r will produce to much lag because i want a everyday car where i can be in traffic and not bog everywhere and still be bale to run 11's at the track


so thats why i am asking either i would go with 3076 or the 35r also i will be getting tuned at ICS so i heard alot of good things about them and how well they tune with the meth kits and bigger turbos
i would say go with the hta 35r. it seems to spoolup like a 3076 or sooner with more power on pump and much more on race gas
Old Feb 10, 2008, 10:33 AM
  #10  
Evolved Member
iTrader: (7)
 
turbodreamz21's Avatar
 
Join Date: Oct 2007
Location: Beverly MA
Posts: 540
Likes: 0
Received 0 Likes on 0 Posts
the problem is i cant afford the hta35r kit plus everything else i will need i was going to piece everything on my own thats why im saying gt35r becuase i dont think i can buy hta 35r without it being in a kit
Old Feb 10, 2008, 10:37 AM
  #11  
Evolved Member
iTrader: (2)
 
9sec9's Avatar
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 3,275
Likes: 0
Received 1 Like on 1 Post
Really nice job Freddy302. Were the tires slipping on spool up? Looks like around 4900 the torque/whp did something funky a couple of times. You're using the HTA35R exactly how it should be used on the street. Very nice! Congratulations.
Old Feb 10, 2008, 11:37 AM
  #12  
Evolved Member
iTrader: (15)
 
FL_SilverEvo8's Avatar
 
Join Date: Oct 2005
Location: Fort Myers, FL
Posts: 1,139
Received 0 Likes on 0 Posts
we are all waiting for his reply to our questions. he must be out driving this bad boy around. shoot, thats what i would be doing if i had this done to my evo.
happy driving....don't kill to many V8's out their. leave some for us to toy with.
Old Feb 10, 2008, 12:25 PM
  #13  
Evolved Member
iTrader: (7)
 
ONRAILS's Avatar
 
Join Date: Jul 2006
Location: Kentucky
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
time to port the head
Old Feb 10, 2008, 12:35 PM
  #14  
Account Disabled
iTrader: (122)
 
Ultimate CC's Avatar
 
Join Date: Apr 2005
Location: Peekskill NY
Posts: 6,876
Likes: 0
Received 0 Likes on 0 Posts
man that thing looks like its a blast to drive...
Old Feb 10, 2008, 12:41 PM
  #15  
Evolved Member
iTrader: (11)
 
socalmr's Avatar
 
Join Date: Aug 2006
Location: Los Angeles
Posts: 500
Likes: 0
Received 0 Likes on 0 Posts
now that is impressive!!!
this just close the deal for me


Quick Reply: FP HTA35r Dyno #’s w/ Meth



All times are GMT -7. The time now is 03:35 AM.