2.3L Stroker with a gt35r
#1
Newbie
Thread Starter
Join Date: Mar 2010
Location: spore
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
2.3L Stroker with a gt35r
Could anyone tell me whats the full boost rpm on a 2.3 with a gt35r??? Would it be suitable for street racing? Like Japanese wangan races
#4
Newbie
Thread Starter
Join Date: Mar 2010
Location: spore
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Reliability is my priority hahaha i dont wanna end up going to the workshop now and then to fix up problems... But im only going to use ecutek would that be sufficient? Im thinking of getting a motec down the road but not now...
#5
Newbie
Thread Starter
Join Date: Mar 2010
Location: spore
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Im actually buying this stroker kit and gt35r turbo kit from a guy. According to him this stroker has seen only 1000km which is around 600miles... It has 85.5mm wiseco pistons, howard conrods which i nvr heard before, balance billet crank, arp headstuds... Anything i should look out for?
#6
Evolved Member
iTrader: (6)
Join Date: Jul 2010
Location: SD
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
Well, hope he broke the motor in correctly for one Compression tests are your friend.
I'm seeing full boost around 4500rpms (spool should improve a little when I move from Wastegate boost) but thats also dependent on a TON of other factors...Intake/Exhaust Manifold, TB, Exact turbo sizing (I'm running a .63 AR), Tune/fuel type, billet/hta etc etc
I'm seeing full boost around 4500rpms (spool should improve a little when I move from Wastegate boost) but thats also dependent on a TON of other factors...Intake/Exhaust Manifold, TB, Exact turbo sizing (I'm running a .63 AR), Tune/fuel type, billet/hta etc etc
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FQ4OO
Evo Show / Shine
25
Aug 14, 2010 01:50 PM