eb66

iTrader: (5)

Could someone with a manual help me out and post the correct procedure for checking coil packs and spark plug wires with a multimeter? I've done searches, but I haven't found anything concrete yet.

I don't know electrical troubleshooting well yet, and I watched a video on testing spark plug wires, but EVO wires are set up a little differently because of the coil pack. I read in another post that the resistance on spark wires should be 15-19 ohms. Where do I measure this resistance?

And how about the coil pack?

Davo

iTrader: (3)

you measure the resistance across the plug wire

+'ve on one end and -'ve on the other of the plug wire

FSm says no more than 19k ohms on the wire

i am not familiar with the coil

eb66

iTrader: (5)

You can just pull on the coil-side boot on the wire to get that end free from the coil? Don't want to rip the wire...

eb66

iTrader: (5)

Can someone help out? I will be buying a manual, but I need to check this out before it gets here.

Correct procedure for checking coil pack resistance?

Josh083188

iTrader: (6)

I would like to know this to.

buchnerj

iTrader: (19)

I bookmarked this thread, when I get home around 1230 I will post the service manual page.

TommiM

iTrader: (19)

do you mean 1.9Kohms? 19,000 ohms seems like alot. every other spark plug wire I have tested seems to be average of 2k ohms or so for oem stuff.