ToxicFab Stock Frame Forward Facing Manifold...
Nov 10, 2011, 05:24 PM
#1
ToxicFab Stock Frame Forward Facing Manifold...
well... here it is! all new ToxicFab Stock Frame Forward Facing manifold! for all those out there who have asked me to build it, and wanted the edge with your stock frame turbo, here it is!
This kit clears all A/C components for those interested in keeping air conditioning.
The stock wastegate also clears everything leaving room for a vacuum line to be ran. Also something considered for, was a good path for a oil drain line to be ran. I'm working on a lower intercooler pipe for it as well. the center cartridge will need to be clocked about 15 degrees for oil feed to be directly on top, as well as the little pin in the turbine housing removed.
Figured i would jump in here and share the info and hear some feed back on it.
thanks, Collin
For all you wondering about the o2 housing for it, here it is, bolts to your factory or aftermarket down pipe and retains the donut gasket!
Of course, Pics installed!
Enjoy!
This kit clears all A/C components for those interested in keeping air conditioning.
The stock wastegate also clears everything leaving room for a vacuum line to be ran. Also something considered for, was a good path for a oil drain line to be ran. I'm working on a lower intercooler pipe for it as well. the center cartridge will need to be clocked about 15 degrees for oil feed to be directly on top, as well as the little pin in the turbine housing removed.
Figured i would jump in here and share the info and hear some feed back on it.
thanks, Collin
For all you wondering about the o2 housing for it, here it is, bolts to your factory or aftermarket down pipe and retains the donut gasket!
Of course, Pics installed!
Enjoy!
