Another 4g69/63 piston question. need some help
#1
Newbie
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Location: LA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Another 4g69/63 piston question. need some help
well, first of all Hello, long time lurker and first time poster.
before all the bashing begins. Id like to let you guys know i searched, and my question is
will evo pistons work in a 69 block without issues?
I'm looking to order so i need to be right.
i know they need to be 87mm
i was looking at the Wiseco 1400HD in 9.5.1 87mm
but after reading around I have found some threads on here that say there is a 0.50 difference in height, although it is a bit confusing. I have found several threads saying that they have to be custom made, but just as many threads saying to toss in 87mm evo pistons without issues.
so my question again, could one of you guys...please! just give a push in the right direction and give me a definitive answer.
The parts I'm working with
8 head
69 block
parts I have waiting to go all in
I have hks 274/278 cams
Crower Ti valve springs retainers
ARP Main/head studs
AMS fuel rail
GSC zero tick lifters
Gates Racing belt
AEM Tru time gears
was looking at ordering Manley Turbo tuff standard 150mm length rods, ferrea standard 6000 valves/seals and... pistons? I need help with pistons, leghnt wise.
any help guys, appreciate it!
before all the bashing begins. Id like to let you guys know i searched, and my question is
will evo pistons work in a 69 block without issues?
I'm looking to order so i need to be right.
i know they need to be 87mm
i was looking at the Wiseco 1400HD in 9.5.1 87mm
but after reading around I have found some threads on here that say there is a 0.50 difference in height, although it is a bit confusing. I have found several threads saying that they have to be custom made, but just as many threads saying to toss in 87mm evo pistons without issues.
so my question again, could one of you guys...please! just give a push in the right direction and give me a definitive answer.
The parts I'm working with
8 head
69 block
parts I have waiting to go all in
I have hks 274/278 cams
Crower Ti valve springs retainers
ARP Main/head studs
AMS fuel rail
GSC zero tick lifters
Gates Racing belt
AEM Tru time gears
was looking at ordering Manley Turbo tuff standard 150mm length rods, ferrea standard 6000 valves/seals and... pistons? I need help with pistons, leghnt wise.
any help guys, appreciate it!
Thread
Thread Starter
Forum
Replies
Last Post
tscompusa
Evo Engine / Turbo / Drivetrain
158
Jan 17, 2017 02:52 PM
Benja
Evo Engine / Turbo / Drivetrain
5
Mar 21, 2013 05:25 PM
2006GSR
Evo Engine / Turbo / Drivetrain
26
Jul 24, 2012 03:33 AM