RABYRAB

iTrader: (14)

Heres what I am getting: P0122 Throttle/Pedal Position Sensor/Switch "A" Circuit Low - I replaced the throttle body sensor (with a used 1 but haven't driven the car yet)

P0113 Intake Air Temperature Sensor 1 Circuit High -- Maybe this is the 1 about my air leak

P0117 Engine Coolant Temperature Circuit Low

I have no idea about this one, anyone please help????

Car was running fine until I swapped for a 9 turbo on my 8. Now the car just shuts right down. and ets piping and hks intake and pipe. There is a massive air leak I found on the turbo side of the exhaust manifold which i am fixing. What do all these codes mean? Is it time for a stand alone ecu? If I replace a sensor will it f up again and is that the solution?

Thanks in advance

RABYRAB

iTrader: (14)

Help

EatSleepBoost

iTrader: (9)

yo do not need a standalone.

fix ur air leak. as far as coolant temp, its common for those sensor to go bad or you may have air in ur cooling system. run the car with the coolant cap off to let the air bubbles out, top the fluid off then put the cap on.

RABYRAB

iTrader: (14)

what do I need?

RABYRAB

iTrader: (14)

the car doesnt run it dies.

sikrsix

iTrader: (16)

^^ you need to fix whats wrong with your car first.

RABYRAB

iTrader: (14)

Thats the problem i dont know if its a fuse or after i fix the air leak in the mani and radiater if it is something else