Broken backing on rear seats in trunk area.
#1
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Broken backing on rear seats in trunk area.
See the pic for the issue. I bought my evo like this. The rear part of the rear seat is all cracked and broken. Worse than the pictures show. I wanted to install my amp on to it but Probably cant. Is there a solution to this? Can that part be replaced? Can the entire rear seats be replaced? lol
Where else do people install their amps at? I have an alpine 4 channel amp. Its not huge.
Where else do people install their amps at? I have an alpine 4 channel amp. Its not huge.
#2
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
oh also, that mdf panel thingy that goes over the spair. It moves around. Is it supposed to be glued to the carpet piece? Also what are those little square things in the truck on the inside right near the rear bumper but stil inside the trunk. It looks like something is supposed to latch do those things.
#3
Evolved Member
iTrader: (36)
You should be able to get a new piece for that from Mitsubishiparts.net
RussellM is a vendor on here..
Contact him and ask
I have an MDF board there covered in grey carpet that I attached my amp and power cap to.
The spare tire board is supposed to be glued to the carpet, but mine came up soon after i bought it..
It had 2 small glue spots but didn't last.
I just used some velcro and glue and glued it back, so I can remove it with the velcro if I want.
The little black hooks on either side of the trunk are for the cargo net.
You have to buy that seperately.
I have one, got it from RussellM
Keep my tool case there..
good luck.
RussellM is a vendor on here..
Contact him and ask
I have an MDF board there covered in grey carpet that I attached my amp and power cap to.
The spare tire board is supposed to be glued to the carpet, but mine came up soon after i bought it..
It had 2 small glue spots but didn't last.
I just used some velcro and glue and glued it back, so I can remove it with the velcro if I want.
The little black hooks on either side of the trunk are for the cargo net.
You have to buy that seperately.
I have one, got it from RussellM
Keep my tool case there..
good luck.
#5
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
i appreciate the help guys. as sad as it sounds, a new trim cloth is going to be my first mod! yippey!! Adds 0 HP and 0 ft-lbs torque, and a happy smile on my face
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Juan Martinez
Lancer How To Requests / Questions / Tips
23
Jun 26, 2013 07:57 AM