I have Non HID Foglight headlights and want JDM MR
Feb 16, 2006, 10:13 PM
#1
Evolving Member
Thread Starter
iTrader: (12)
Join Date: Oct 2005
Location: Texas
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
I have Non HID Foglight headlights and want JDM MR
Ok i have the NON HID headlights and do not have the foglight in my EVO 8. I want to get a HID conversion online and the JDM MR headlights. How hard is it going to be for me to wire in the foglights and locate a factory switch and all that? Is there a easier way for me to get fog lights in my headlights? any other options at all.
Thanks
Thanks
Mar 2, 2006, 08:55 AM
#4
Originally Posted by caligula
simple you need to go to the dealer and get a fog light switch,fog light relay and thats all i think.good luck 
https://www.evolutionm.net/forums/sh...&highlight=hid
Oct 27, 2006, 07:18 PM
#5
Evolving Member
iTrader: (7)
Join Date: Oct 2003
Location: NY
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WavMixer
Wrong! In 05 the RS and GSRs did not have all of the connections in the fuse block for the relay and fuse. You will need to fabricate everything. I have created a walk thru on what needs to be done:
https://www.evolutionm.net/forums/sh...&highlight=hid
https://www.evolutionm.net/forums/sh...&highlight=hid
Is the IXs the same deal? Does everything have to be fabricated?
Kenny
Trending Topics
Nov 1, 2006, 12:51 PM
#8
Evolving Member
iTrader: (7)
Join Date: Oct 2003
Location: NY
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by UCB
Im just going to buy an aftermarket fog kit and use the harness that comes with it
What type of aftermarket fog kit do you plan to buy? Is there an aftermarket fog kit that is identical to the OEM foglight setup within the headlight housing?
Kenny
Nov 6, 2006, 07:18 PM
#9
Newbie
Join Date: Oct 2006
Location: orange county, ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JDMonster
Ok i have the NON HID headlights and do not have the foglight in my EVO 8. I want to get a HID conversion online and the JDM MR headlights. How hard is it going to be for me to wire in the foglights and locate a factory switch and all that? Is there a easier way for me to get fog lights in my headlights? any other options at all.
Thanks
Thanks
same question but i have a IX
Nov 7, 2006, 09:07 AM
#11
Evolved Member
iTrader: (12)
Join Date: Jun 2006
Location: SJ, CA
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Illrunya
What type of aftermarket fog kit do you plan to buy? Is there an aftermarket fog kit that is identical to the OEM foglight setup within the headlight housing?
Kenny
Kenny
IIRC, the there is no real way to use the OEM fogs without a custom harness unless you switch over the entire engine harness
Jun 25, 2007, 05:52 PM
#14
O.K., here is the deal, you will also need a front ecu from an evo that has foglights, in addition to the switches and what not.
also, authentic JDM headlights use H7 bulbs, not H11.
the standard switch for the foglight in an evo is not a normal switch, it sends a signal to the front ecu to turn on the fogs.
easier to run a separate harness, switch, and wiring IMHO.
also, authentic JDM headlights use H7 bulbs, not H11.
the standard switch for the foglight in an evo is not a normal switch, it sends a signal to the front ecu to turn on the fogs.
easier to run a separate harness, switch, and wiring IMHO.
