Window Belt Moulding Trim Removal/Install Help
Apr 26, 2014, 06:45 AM
#1
Newbie
Thread Starter
Join Date: Jul 2012
Location: Block 1
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Window Belt Moulding Trim Removal/Install Help
Hi guys!
As the title states I wanted to replace my worn out window belt line with new ones, but so far I just managed to do some scratches on the door during the process.
There's a guide on the latest lancer/evo x ( https://www.evolutionm.net/forums/09...ndow-trim.html ) but none on the CT9A.
Anyone? This will be a good guide on DIY painters as well.
As the title states I wanted to replace my worn out window belt line with new ones, but so far I just managed to do some scratches on the door during the process.
There's a guide on the latest lancer/evo x ( https://www.evolutionm.net/forums/09...ndow-trim.html ) but none on the CT9A.
Anyone? This will be a good guide on DIY painters as well.
Last edited by Rrrr; Apr 26, 2014 at 06:48 AM.
Aug 2, 2015, 01:47 PM
#2
Newbie
Join Date: Apr 2015
Location: Germany
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
you need to remove the mirror first.
Afterwards you'll be able to pull the molding upwards.
With the molding pulled up, you can slide it one inch towards the rear and pull it out in upwards direction.
You can see the clip which is holds the molding near the mirror, in the below picture:
Kind regards,
qu1ckz
you need to remove the mirror first.
Afterwards you'll be able to pull the molding upwards.
With the molding pulled up, you can slide it one inch towards the rear and pull it out in upwards direction.
You can see the clip which is holds the molding near the mirror, in the below picture:
Kind regards,
qu1ckz
Thread
Thread Starter
Forum
Replies
Last Post
ct9asilver
Evo How Tos / Installations
5
Jun 24, 2016 03:33 PM
velocityhead
09+ Ralliart How-To/Installations
26
Jun 2, 2015 06:36 AM
vtluu
Evo How To Requests / Questions / Tips
15
Feb 7, 2008 09:40 PM