AUTO DESIGN - HID Conversion Kits - Specifically for Evo
#1
Former Sponsor
Thread Starter
AUTO DESIGN - HID Conversion Kits - Specifically for Evo
JLC LIGHTING HID Conversion Kit for Evo X
Featured here is a complete set of our Digitally Controlled Ballasts HID Conversion Kit with our high quality HID bulbs specifically made to be plug and play to the Evo X. This kit will not cause any flickering or power up issues where one side is on and the other side is not. no additional decoder / capacitors / resistors / relay harness needed! Our ballasts have been consistently tested to only have a failure rate of only 0.03%. This is a great Plug and Play kit that will not give you any headaches.
Featured here is a complete set of our Digitally Controlled Ballasts HID Conversion Kit with our high quality HID bulbs specifically made to be plug and play to the Evo X. This kit will not cause any flickering or power up issues where one side is on and the other side is not. no additional decoder / capacitors / resistors / relay harness needed! Our ballasts have been consistently tested to only have a failure rate of only 0.03%. This is a great Plug and Play kit that will not give you any headaches.
<<Click to enlarge images>>
Features:
* Premium Quality HID Light Bulbs
* Special ballasts will not cause any flickering
* Plug-N-Play to original housing
* 12V Power Source
* Adds a High-End look to your vehicle
* Digital Control Ballast
JLC LIGHTING HID Conversion Kit Includes:
* 2x Mid Slim Digital Controlled HID Ballasts
* 2x High Quality Xenon HID Light Bulbs
* 2x Ballast Mounting Brackets
* and necessary hardwares
Available in:
3,000k 6,000K 8,000K 10,000K or 12,000K.
Purple Color, Green Color, Red Color, Pink Color ($5 extra)
Bulb Sizes:
H1, H3, H4 / 9003 / HB2, H7, H8 / H9 / H11, 9004 / HB1, 9005 / HB3, 9006 / HB4, 9007 / HB5, 9008 / H13, 9145 / 9140 / 9155 / H10, 880 / 881 / 889, 5202
Pricing:
SPECIAL For EvolutionM Members ONLY $150 shipped anywhere in US
Warranty:
2 years
DIGITAL CONTROLLED HID BALLASTS ASSEMBLED IN JAPAN
Please Note:
As HIDs are quite sensitive, to minimize chances of breaking the product(s) do not over apply pressure, and wipe off all oil from surface of the HID bulbs when installing.
- D i r e c t o r y -
- Services -
• AUTO DESIGN Wheels RE-finishing Services | • AUTO DESIGN Custom work & Retro-FIT | • JLC Vinyl Wrapping Services •
- Lighting For EVO X -
• JLC HID Conversion Kit | • JLC CREE LED reverse bulbs •
• JLC D2 Replacement bulbs | • JLC Exterior & Interior LEDs •
- Lighting For EVO -
• JLC HID Conversion Kit | • JLC CREE LED reverse bulbs •
• JLC D2 Replacement bulbs | • JLC Exterior & Interior LEDs •
- Lighting For Lancer-
• JLC HID Conversion Kit | • JLC CREE LED reverse bulbs •
• JLC D2 Replacement bulbs | • JLC Exterior & Interior LEDs •
- Lighting For Lancer Ralliart-
• JLC HID Conversion Kit | • JLC CREE LED reverse bulbs •
• JLC D2 Replacement bulbs | • JLC Exterior & Interior LEDs •
h e l p / s u p p o r t:
Private Message me Or AIM me
Peter @ 4aeAUTOdesign
- Services -
• AUTO DESIGN Wheels RE-finishing Services | • AUTO DESIGN Custom work & Retro-FIT | • JLC Vinyl Wrapping Services •
- Lighting For EVO X -
• JLC HID Conversion Kit | • JLC CREE LED reverse bulbs •
• JLC D2 Replacement bulbs | • JLC Exterior & Interior LEDs •
- Lighting For EVO -
• JLC HID Conversion Kit | • JLC CREE LED reverse bulbs •
• JLC D2 Replacement bulbs | • JLC Exterior & Interior LEDs •
- Lighting For Lancer-
• JLC HID Conversion Kit | • JLC CREE LED reverse bulbs •
• JLC D2 Replacement bulbs | • JLC Exterior & Interior LEDs •
- Lighting For Lancer Ralliart-
• JLC HID Conversion Kit | • JLC CREE LED reverse bulbs •
• JLC D2 Replacement bulbs | • JLC Exterior & Interior LEDs •
h e l p / s u p p o r t:
Private Message me Or AIM me
Peter @ 4aeAUTOdesign
Last edited by AUTO Design; Dec 2, 2011 at 07:46 AM.
#4
Evolving Member
iTrader: (7)
Join Date: Feb 2010
Location: Brea, CA - Orange County
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
So will these power up like stock when the park break is down but the lights aren't turned on. Currently mine flicker when break down and lights not turned on, however I just leave them on all the time to prevent this.
Or will they not power on at all until I power up the headlights myself. It seems that the ballast is powerful enough to support the DRL can you confirm this thanks
Or will they not power on at all until I power up the headlights myself. It seems that the ballast is powerful enough to support the DRL can you confirm this thanks
#5
Evolved Member
iTrader: (29)
Do you have 4300 or 5k? I'm running 6 and it's a little too blue for me. That said they're IIKDOs and have been running great no flicker the past 4 years.. just looking to swap. Header at the thread says its for X, and the ballast looks a little big/heavy compared to others out there - please PM
#6
Former Sponsor
Thread Starter
So will these power up like stock when the park break is down but the lights aren't turned on. Currently mine flicker when break down and lights not turned on, however I just leave them on all the time to prevent this.
Or will they not power on at all until I power up the headlights myself. It seems that the ballast is powerful enough to support the DRL can you confirm this thanks
Or will they not power on at all until I power up the headlights myself. It seems that the ballast is powerful enough to support the DRL can you confirm this thanks
Do you have 4300 or 5k? I'm running 6 and it's a little too blue for me. That said they're IIKDOs and have been running great no flicker the past 4 years.. just looking to swap. Header at the thread says its for X, and the ballast looks a little big/heavy compared to others out there - please PM