*NEW* AEM Inventory Blowout! Unbeatbale Pricing Service And Selection
Oct 4, 2012, 10:44 AM
#1
*NEW* AEM Inventory Blowout! Unbeatbale Pricing Service And Selection
You cannot beat our service, shipping times, or prices on anything AEM has to offer. We won't be under sold on these or any AEM products!
Shoot a salesman a call 1-(888)maperformance, PM me here,
or email sales@maperformance.com and we will hook it up big time!!
Here are just a few fun examples on the goodies we have to offer!
EvoM Member Pricing: $1750.55 Shipped
AEM’s Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below. Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. Our new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.
AEM 4 Channel UEGO Wideband Controller
Part Number: 30-2340
$569.84 Shipped!
AEM's 4-Channel Wideband UEGO Controller is a powerful, cost effective tuning tool that allows users to monitor the Air/Fuel Ratio (AFR) of up to 4 individual cylinders simultaneously. This unique controller features an optional exhaust back pressure compensation* kit to correct AFR readings of Wideband sensors mounted pre-turbo. The system includes stainless steel bungs specially designed for use in individual port applications which feature a finned stand-off design which both cools the sensor body and minimizes exhaust port restriction. The 4-Channel Wideband UEGO controller is ideal for datalogging, engine management systems or racing applications where individual cylinder trims are needed. The system features simple wiring and installation with 0-5v analog outputs for each AFR channel as well as a CAN datastream output. The controller is shock & weather proof and can be mounted anywhere in or outside the vehicle.
We've got deals on every gauge AEM makes, here's just one example:
AEM Analog Gauges Starting As Low As $118.24
0 - 60 PSI (Imperial)
0 - 4.1 BAR (Metric)
Includes both black and white gauge faces.
[youtube]BciG3uuRcSk[/youtube]
Combine AEM's Analog Boost Gauge with their Analog Wideband Gauge and package them in this Auto Meter dual gauge pod and keep your car in check. Auto Meter Gauge Pods fit well and look excellent when installed.
Bundle Includes:
AEM Analog Boost Gauge (30-5132)
AEM Analog Wideband Air / Fuel Gauge (30-5130)
AEM Boost Display Gauge (-30-35PSI) 30-4406
Part Number: 30-4402
$159.39 With FREE Shipping!
AEM’s Digital Boost gauge unites unsurpassed accuracy, speed and control with an easy to read, digital interface. The AEM digital boost gauge also offer a 0-5v analog output for use with data loggers and virtually any engine management system, such as the AEM EMS or FIC.
Why You Want One
The AEM Digital Boost gauge features a AEM 3.5BAR brass sensor, making it among one of the fastest and most accurate gauges available. The bright LED display shows boost in 1 PSI increments, and the sweeping LED "needle" lines the edge and changes color as increases. The digital boost gauge comes with both silver and black bezels and white and black faceplates that are easily interchangeable.
Features
Gauge Readout from -30 to 35PSI
Includes easy-to-install harness and sensor
Complete stand alone gauge requires no additional sensors or programs to operate
Includes black and silver bezel and white and black faceplates
Ideal for both fuel injected and carbureted motors
LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
Boost gauge includes AEM 3.5BAR brass sensor
0-5v analog output included for use with data loggers and virtually any engine management system
Kit Includes
Shoot a salesman a call 1-(888)maperformance, PM me here,
or email sales@maperformance.com and we will hook it up big time!!
Here are just a few fun examples on the goodies we have to offer!
AEM Series 2 Engine Management System (Mitsubishi Evo 9)
AEM Series 2 Engine Management System (Mitsubishi Evo 9)
Part Number: 30-6320EvoM Member Pricing: $1750.55 Shipped
AEM’s Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below. Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. Our new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.
AEM 4 Channel UEGO Wideband Controller
Part Number: 30-2340
$569.84 Shipped!
AEM's 4-Channel Wideband UEGO Controller is a powerful, cost effective tuning tool that allows users to monitor the Air/Fuel Ratio (AFR) of up to 4 individual cylinders simultaneously. This unique controller features an optional exhaust back pressure compensation* kit to correct AFR readings of Wideband sensors mounted pre-turbo. The system includes stainless steel bungs specially designed for use in individual port applications which feature a finned stand-off design which both cools the sensor body and minimizes exhaust port restriction. The 4-Channel Wideband UEGO controller is ideal for datalogging, engine management systems or racing applications where individual cylinder trims are needed. The system features simple wiring and installation with 0-5v analog outputs for each AFR channel as well as a CAN datastream output. The controller is shock & weather proof and can be mounted anywhere in or outside the vehicle.
We've got deals on every gauge AEM makes, here's just one example:
AEM Analog Gauges Starting As Low As $118.24
0 - 60 PSI (Imperial)
0 - 4.1 BAR (Metric)
Includes both black and white gauge faces.
[youtube]BciG3uuRcSk[/youtube]
AEM Boost and Wideband Gauge w/ Auto Meter Dual Gauge Pod Bundle (Mitsubishi Evo 8/9)
Combine AEM's Analog Boost Gauge with their Analog Wideband Gauge and package them in this Auto Meter dual gauge pod and keep your car in check. Auto Meter Gauge Pods fit well and look excellent when installed.
Bundle Includes:
AEM Analog Boost Gauge (30-5132)
AEM Analog Wideband Air / Fuel Gauge (30-5130)
Auto Meter Dual Gauge Pod (Evo 8/9) 20024
AEM Boost Display Gauge (-30-35PSI) 30-4406
Part Number: 30-4402
$159.39 With FREE Shipping!
AEM’s Digital Boost gauge unites unsurpassed accuracy, speed and control with an easy to read, digital interface. The AEM digital boost gauge also offer a 0-5v analog output for use with data loggers and virtually any engine management system, such as the AEM EMS or FIC.
Why You Want One
The AEM Digital Boost gauge features a AEM 3.5BAR brass sensor, making it among one of the fastest and most accurate gauges available. The bright LED display shows boost in 1 PSI increments, and the sweeping LED "needle" lines the edge and changes color as increases. The digital boost gauge comes with both silver and black bezels and white and black faceplates that are easily interchangeable.
Features
Gauge Readout from -30 to 35PSI
Includes easy-to-install harness and sensor
Complete stand alone gauge requires no additional sensors or programs to operate
Includes black and silver bezel and white and black faceplates
Ideal for both fuel injected and carbureted motors
LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
Boost gauge includes AEM 3.5BAR brass sensor
0-5v analog output included for use with data loggers and virtually any engine management system
Kit Includes
Please contact us for unbeatable pricing on these products, also keep in mind we will match or beat any competitors pricing on so called "package deals"!
: Send us a PM|||||
: NateAtMAP|||||
: 1-888-MAPERFORMANCE x 114|||||
: Nate@MAPerformance.com|||||Click to chat for an instant quote!
|||||
|||||
|||||
Like us? Tell us and everybody else about it!
|||||
|||||
||||||||||
Last edited by maperformance; Apr 8, 2015 at 09:32 AM.
Trending Topics
Oct 19, 2012, 07:31 AM
#12
Finally, a fuel feed line solution for your EVO X!
This MAP fuel feed line kit replaces your entire factory feed line from the fuel pump housing to the fuel rail with 6an hose. Supplied push-on EFI fittings allow for an easy installation that requires no modification to your fuel pump housing or fuel rail!
Why replace your factory fuel feed line? Restrictions in the factory line cause pressure drop from the fuel pump to the rail; depending on the application a fuel pressure reading at the fuel rail might be 5, 10, or even 15psi lower than the fuel pressure at the pump. Take a gander at any fuel pump flow chart and you will find that fuel pumps flow significantly less at higher fuel pressures. To put this into perspective a Walbro 400lph fuel pump flows roughly 253lph at 90psi (13.5 volts) in comparison to 300lph when pressure is reduced to 75psi. An additional 50lph translates into almost 100whp of additional fuel capacity on E85!
This kit is available with or without a FueLab inline filter, however, please keep in mind that any aftermarket fuel pump (outside of the DW65C) will eliminate your factory in tank filter making this a pretty good idea.
This MAP fuel feed line kit replaces your entire factory feed line from the fuel pump housing to the fuel rail with 6an hose. Supplied push-on EFI fittings allow for an easy installation that requires no modification to your fuel pump housing or fuel rail!
Why replace your factory fuel feed line? Restrictions in the factory line cause pressure drop from the fuel pump to the rail; depending on the application a fuel pressure reading at the fuel rail might be 5, 10, or even 15psi lower than the fuel pressure at the pump. Take a gander at any fuel pump flow chart and you will find that fuel pumps flow significantly less at higher fuel pressures. To put this into perspective a Walbro 400lph fuel pump flows roughly 253lph at 90psi (13.5 volts) in comparison to 300lph when pressure is reduced to 75psi. An additional 50lph translates into almost 100whp of additional fuel capacity on E85!
This kit is available with or without a FueLab inline filter, however, please keep in mind that any aftermarket fuel pump (outside of the DW65C) will eliminate your factory in tank filter making this a pretty good idea.
Last edited by maperformance; Oct 19, 2012 at 07:36 AM.
Oct 22, 2012, 08:20 AM
#13
Did you know that ALL MAP Fab in house manfiolds are built with the following features?:
100 Percent polished schedule 10:
MAP invested hundreds of hours into developing a system to polish schedule 10 to our specification including research into the best possible tumbler, sampling a wide array of aggregate to generate the perfect finish to start with.
All manifolds welded on back purge stations
ALL MAP in house fabricated manifolds are tig welded and 100 percent back purged. This a process by which shielding gas is introduced to the interior of the welded area to prevent the molten metal from being exposed to oxygen. This results in stronger, more uniform and cleaner welds.
All MAP in house fabricated manifolds come with thick, laser cut/cnc'ed stainless flanges
Resulting in longer lasting and more aesthetically pleasing parts
All MAP in house fabricated manifolds come ported
Where some companies will simply grind away excess material for a simple transition into the runners, MAP manifolds are actually ported and shaped for maximum flow.
All MAP manifolds are backed by our Lifetime Ownership Guarantee!
When purchasing a MAP manifold, purchase with confidence. We guarantee that manifold for the lifetime of your ownership of it (valid for the original purchaser only).
MAP Complete T3 Turbo Kit (Mitsubishi Evo X)
The wait is finally over as you can now get the MAP treatment in a T3 configuration using some of the best components available! Choose from four killer PTE turbochargers (please don't hesitate to contact us for suggestions) and turn your horsepower dreams into a reality. This kit includes every component you will need to complete the installation.
Included Components
Turbocharger of your choice
3" Stainless Steel V-Band Downpipe with Flex
304SS Tubular Exhaust Manifold with CNC Transition Head Flange to 1.5" Primaries
Cam Angle Sensor Heat Shields (not pictured)
Turbosmart Comp Gate 40 Wastegate
Wastegate Dump Tube
Stainless Steel Upper Intercooler Pipe
Oil Feed and Return Lines
All Applicable Gaskets, Hardware, Clamps and Couplers
100 Percent polished schedule 10:
MAP invested hundreds of hours into developing a system to polish schedule 10 to our specification including research into the best possible tumbler, sampling a wide array of aggregate to generate the perfect finish to start with.
All manifolds welded on back purge stations
ALL MAP in house fabricated manifolds are tig welded and 100 percent back purged. This a process by which shielding gas is introduced to the interior of the welded area to prevent the molten metal from being exposed to oxygen. This results in stronger, more uniform and cleaner welds.
All MAP in house fabricated manifolds come with thick, laser cut/cnc'ed stainless flanges
Resulting in longer lasting and more aesthetically pleasing parts
All MAP in house fabricated manifolds come ported
Where some companies will simply grind away excess material for a simple transition into the runners, MAP manifolds are actually ported and shaped for maximum flow.
All MAP manifolds are backed by our Lifetime Ownership Guarantee!
When purchasing a MAP manifold, purchase with confidence. We guarantee that manifold for the lifetime of your ownership of it (valid for the original purchaser only).
MAP Complete T3 Turbo Kit (Mitsubishi Evo X)
The wait is finally over as you can now get the MAP treatment in a T3 configuration using some of the best components available! Choose from four killer PTE turbochargers (please don't hesitate to contact us for suggestions) and turn your horsepower dreams into a reality. This kit includes every component you will need to complete the installation.
Included Components
Turbocharger of your choice
3" Stainless Steel V-Band Downpipe with Flex
304SS Tubular Exhaust Manifold with CNC Transition Head Flange to 1.5" Primaries
Cam Angle Sensor Heat Shields (not pictured)
Turbosmart Comp Gate 40 Wastegate
Wastegate Dump Tube
Stainless Steel Upper Intercooler Pipe
Oil Feed and Return Lines
All Applicable Gaskets, Hardware, Clamps and Couplers
Oct 24, 2012, 08:01 AM
#15
MAPerformance stock frame turbos! Available for the EVO 8/9 (EVO 8 will require a conversion kit to fit an EVO 9 turbo available through us as well!) AND EVO X!
Power, reliability, affordability all in a stock frame turbo? It's as simple as that. MAP turbos use our MAP Billet wheel, dual oiling ports for improved lubrication and all EF3, EF4's include upgraded thrust bearings. Simply put, MAP is your answer for your stock frame turbo needs!
Customer satisfaction is our highest priority!
If for some reason you are not happy with your MAP turbocharger simply send it back to us within 30 days from the date of purchase and we will refund you 100% of your purchase price for that item.
Please note the turbocharger must not be damaged or altered in any way, and all accessories must be included within the return shipment.
Power, reliability, affordability all in a stock frame turbo? It's as simple as that. MAP turbos use our MAP Billet wheel, dual oiling ports for improved lubrication and all EF3, EF4's include upgraded thrust bearings. Simply put, MAP is your answer for your stock frame turbo needs!
Customer satisfaction is our highest priority!
If for some reason you are not happy with your MAP turbocharger simply send it back to us within 30 days from the date of purchase and we will refund you 100% of your purchase price for that item.
Please note the turbocharger must not be damaged or altered in any way, and all accessories must be included within the return shipment.