Guaranteed best deals on Hawk/Goodridge/DBA/Carbotech
Aug 31, 2006, 10:48 PM
#1
Former Sponsor
Thread Starter
iTrader: (67)
Join Date: Aug 2006
Location: Cary, NC
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
Guaranteed best deals on Hawk/Goodridge/DBA/Carbotech
Check out this brake pad sale - Best deals going!
Street/combo pads
End of month special - HPS fr/rr at the LOWEST PRICE HERE
We stock LOTS of Hawk brake pads for quite a few applications like all Subaru's, and many other imports. We even carry some BMW pads. Call for your application - they are in stock and ready to go.
I've seen mis-information posted on these so here is what you can expect from the Hawk Street lineup.
HPS - Excellent street pad - metallic based compound with good feel - firm pedal - and moderate to low dust with little or no noise. They do not 'grab' like OEM pads but have a smooth and controllable feel with good braking power in reserve. A very good street pad for all around use at a good price. There are some reports of squeal - it seems related to being used after the OEM pads on OEM rotors - especially right after install. Good bedding/time seems to cure it in most cases.
HP+ A very noticeable jump in friction with some additional noise and dust although still not as dusty as the OEM pads. Great for autocross or hard street use as the cold friction is high with acceptable rotor wear. They are also a good choice for a track newbie but will NOT stand up to hard core track use. You need race pads for that. The higher friction is IMO well worth the pretty insignificant squealing. Cold stopping was acceptable in New Jersey winters.
Performance Ceramics: The newest Hawk compound designed to give good street performance with no noise and VERY LOW DUST. Reports from users indicate they are as advertised. The intent was to make a pad that could take hard use without falling apart while making very little dust or noise. This is for keeping your wheels clean - no noise - and good performance/price.
Combo deals in stock!!
Hawk HPS Brake Pads - Front and Rear (You get all 8 pads)
$160 shipped
**And a nice decal to boot**
Hawk Performance Ceramic Brake Pads - Front and Rear
$195 **This gets you a snappy decal too**
Hawk HPS Brake Pads - Front and Rear with Goodridge SS lines (uncoated - all 4) $260
(New Goodridge packaging - we hope they finally got it right! - wOOt!)
Hawk Performance Ceramic Brake Pads with Goodridge SS Lines (uncoated - all 4) $295
Hawk HP+ Brake Pads Front and Rear (all 8 - and 2 decals - 1 black and 1 white
)
$225
NEW ITEM - SP PERFORMANCE BRAKE PADS
Not a houshold name but a fine product at a great price. SP Performance brake pads are a premium semi-metallic pad with only moderate dust and noise. Far better than commodity pads at the chain stores at a comparable price.
$110 shipped
Race pads
Hawk track monster special
DTC-70 Front and DTC-60 rear - a great setup. You know if you need them. Ask T2 record setter Marty Grand why they are good.
$526.31
You get a Hat and a decal with these puppies.
Carbotech XP-12 Front and XP-10 Rear - another great setup
$408
Carbotech isn't giving out hats...sorry
The next level....
Hawk Blues - Easy to bed and known for durability. Excellent when run in temperature.
$381.29
Ferrodo's - no need to pump these up.
Ferrodo DS2500 pads - Front and rear
$295
Brake Rotors
Disc Brake Australia (DBA) rotors
4000 series rotors prove their worth on the track! Heat treated - pillar vane design rotors with temperature indicating paint dabs. Very sturdy.
Front slotted 4000 (available in BLACK only)
MSRP $325
Rear slotted 4000 (available in BLACK only)
MSRP $295
SP Performance Rotors
These are another quality option. Read about them here
Front $236 pair
Rear $212 pair
There are other machining options available - please inquire for pricing. These rotors are made to order and usually take about 3 days to ship.
Made in the
from premium quality Bradi, Brembo or Aimco blanks.
Premium rotor blanks
Finally got these in - a premium quality EVO rotor blank that doesn't cost a weeks pay!
Fine turned not ground just like your OEM Brembo's
Fronts are priced at $190 per pair.
Rears are priced at $160 per pair.
No free shipping on rotors - they are too darn heavy. Inquire for a quote.
Paypal brakeguru@gmail.com with your order details. I use UPS because it's better.
I am working on taking credit cards for your added convenience but they are EVIL...
Brembo GT kits available by order - please inquire.
Don't know what to get?? Pick up the phone and call me. Want something different? If it's brakes I am the BEST because it's all I do.
919-376-1554
Street/combo pads
End of month special - HPS fr/rr at the LOWEST PRICE HERE
We stock LOTS of Hawk brake pads for quite a few applications like all Subaru's, and many other imports. We even carry some BMW pads. Call for your application - they are in stock and ready to go.
I've seen mis-information posted on these so here is what you can expect from the Hawk Street lineup.
HPS - Excellent street pad - metallic based compound with good feel - firm pedal - and moderate to low dust with little or no noise. They do not 'grab' like OEM pads but have a smooth and controllable feel with good braking power in reserve. A very good street pad for all around use at a good price. There are some reports of squeal - it seems related to being used after the OEM pads on OEM rotors - especially right after install. Good bedding/time seems to cure it in most cases.
HP+ A very noticeable jump in friction with some additional noise and dust although still not as dusty as the OEM pads. Great for autocross or hard street use as the cold friction is high with acceptable rotor wear. They are also a good choice for a track newbie but will NOT stand up to hard core track use. You need race pads for that. The higher friction is IMO well worth the pretty insignificant squealing. Cold stopping was acceptable in New Jersey winters.
Performance Ceramics: The newest Hawk compound designed to give good street performance with no noise and VERY LOW DUST. Reports from users indicate they are as advertised. The intent was to make a pad that could take hard use without falling apart while making very little dust or noise. This is for keeping your wheels clean - no noise - and good performance/price.
Combo deals in stock!!
Hawk HPS Brake Pads - Front and Rear (You get all 8 pads)
$160 shipped
**And a nice decal to boot**Hawk Performance Ceramic Brake Pads - Front and Rear
$195 **This gets you a snappy decal too**
Hawk HPS Brake Pads - Front and Rear with Goodridge SS lines (uncoated - all 4) $260
(New Goodridge packaging - we hope they finally got it right! - wOOt!)
Hawk Performance Ceramic Brake Pads with Goodridge SS Lines (uncoated - all 4) $295
Hawk HP+ Brake Pads Front and Rear (all 8 - and 2 decals - 1 black and 1 white
)$225
NEW ITEM - SP PERFORMANCE BRAKE PADS
Not a houshold name but a fine product at a great price. SP Performance brake pads are a premium semi-metallic pad with only moderate dust and noise. Far better than commodity pads at the chain stores at a comparable price.
$110 shipped
Race pads
Hawk track monster special
DTC-70 Front and DTC-60 rear - a great setup. You know if you need them. Ask T2 record setter Marty Grand why they are good.
$526.31
You get a Hat and a decal with these puppies.
Carbotech XP-12 Front and XP-10 Rear - another great setup
$408
Carbotech isn't giving out hats...sorry
The next level....
Hawk Blues - Easy to bed and known for durability. Excellent when run in temperature.
$381.29
Ferrodo's - no need to pump these up.
Ferrodo DS2500 pads - Front and rear
$295
Brake Rotors
Disc Brake Australia (DBA) rotors
4000 series rotors prove their worth on the track! Heat treated - pillar vane design rotors with temperature indicating paint dabs. Very sturdy.
Front slotted 4000 (available in BLACK only)
MSRP $325
Rear slotted 4000 (available in BLACK only)
MSRP $295
SP Performance Rotors
These are another quality option. Read about them here
Front $236 pair
Rear $212 pair
There are other machining options available - please inquire for pricing. These rotors are made to order and usually take about 3 days to ship.
Made in the
from premium quality Bradi, Brembo or Aimco blanks.Premium rotor blanks
Finally got these in - a premium quality EVO rotor blank that doesn't cost a weeks pay!
Fine turned not ground just like your OEM Brembo's
Fronts are priced at $190 per pair.
Rears are priced at $160 per pair.
No free shipping on rotors - they are too darn heavy. Inquire for a quote.
Paypal brakeguru@gmail.com with your order details. I use UPS because it's better.
I am working on taking credit cards for your added convenience but they are EVIL...
Brembo GT kits available by order - please inquire.
Don't know what to get?? Pick up the phone and call me. Want something different? If it's brakes I am the BEST because it's all I do.
919-376-1554
Last edited by EVOBrakes; Oct 28, 2006 at 07:19 AM.
Sep 2, 2006, 01:34 PM
#5
Evolving Member
iTrader: (5)
Join Date: Jan 2006
Location: AZ
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
i would like to place an order for the Hawk Performance Ceramic Brake Pads - Front and Rear. i live in NC- not too far from Cary and can pick them up as opposed to having them shipped i would just need to know where and for how much. thanks
Trending Topics
Sep 2, 2006, 08:11 PM
#8
Evolved Member
iTrader: (1)
Join Date: Oct 2005
Location: South Florida
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
How do the Hawk HPS pads compare with the stock Brembos? My pads are about shot and I want to go up a level or two but I drive mostly on the street and am getting ready to run the Dragon again. I want to go with quality pads, SS lines and a better brake fluid, I'll upgrade my rotors when they're shot.
My zip is 34983, PM or email me.
My zip is 34983, PM or email me.
Sep 3, 2006, 06:16 AM
#9
Former Sponsor
Thread Starter
iTrader: (67)
Join Date: Aug 2006
Location: Cary, NC
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
My experience w/ HPS pads as compared to many OEM pads is that they are firmer and offer better pedal modulation and feel than the OEM pads. They do require a bit more pedal effort to engage - but control is improved.
They dust less and typically wear very well and are a good price.
They are street pads though so they of course have limitations.
If you can tolerate higher levels of dust and noise then you may like to try the HP+. I run those on my WRX Wagon and will probably never be able to go back to a pure street pad. They bite very well and it is easy to get used to it.
I keep them bedded in and the noise is very reasonable IMO. They do honk like a dying mule in reverse occasionally but overall I find the performance well worth it.
Clean fresh fluid is imperative - ATE is a good performance fluid and value. And it's so pretty
They dust less and typically wear very well and are a good price.
They are street pads though so they of course have limitations.
If you can tolerate higher levels of dust and noise then you may like to try the HP+. I run those on my WRX Wagon and will probably never be able to go back to a pure street pad. They bite very well and it is easy to get used to it.
I keep them bedded in and the noise is very reasonable IMO. They do honk like a dying mule in reverse occasionally but overall I find the performance well worth it.
Clean fresh fluid is imperative - ATE is a good performance fluid and value. And it's so pretty
Sep 3, 2006, 06:51 AM
#10
Former Sponsor
Thread Starter
iTrader: (67)
Join Date: Aug 2006
Location: Cary, NC
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cain
i would like to place an order for the Hawk Performance Ceramic Brake Pads - Front and Rear. i live in NC- not too far from Cary and can pick them up as opposed to having them shipped i would just need to know where and for how much. thanks
I'm sure the other members would like feedback on those pads.
Sep 4, 2006, 09:30 AM
#12
Former Sponsor
Thread Starter
iTrader: (67)
Join Date: Aug 2006
Location: Cary, NC
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
Goodridge - Hawk HPS/HP+/Ceramic in stock - pms answered.
Info on DBA 2-piece color availability coming tomorrow.
4000's (1 piece) are either slotted and black or drilled/slotted and gold.
Info on DBA 2-piece color availability coming tomorrow.
4000's (1 piece) are either slotted and black or drilled/slotted and gold.
Sep 4, 2006, 10:31 PM
#13
Former Sponsor
Thread Starter
iTrader: (67)
Join Date: Aug 2006
Location: Cary, NC
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
I carry quite a few other Hawk HPS part numbers - please inquire
Need brakes for your tow vehicle - Hawk SuperDuty's LAST....and work...and squeal 'just a bit'. Plain rotors available too.
Need brakes for your tow vehicle - Hawk SuperDuty's LAST....and work...and squeal 'just a bit'
. Plain rotors available too.
Sep 5, 2006, 12:10 PM
#15
Former Sponsor
Thread Starter
iTrader: (67)
Join Date: Aug 2006
Location: Cary, NC
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tsi90awd
I'm still trying to find undrilled, unslotted rear rotors. Are the SP rotors available unmolested?
It can be done - thanks!