LJ7two4

I should stop looking at this thread, makes me want TE37

AllDayAnthony

iTrader: (1)

These wheels are so sexy, If only I had the dollars for them

slowsrt4:(

iTrader: (13)

here are mine, 18x9.5+22 with 255/35/18 dunlop direzza zii star specs

Lambert

18x9,5, +22 or +35????

Whats is the correct offset, i wouldnt like to Make some fender roller job.

Biggy VIII

9.5j +35 will rub coilovers in front AFAIK

9.0j +35 works fine, clearance is enough but not large.

+22 needs at least light fender job for anything wider than 8j

This is my opinion nased on my own experience, for everyday street and for track use.

Lambert

+35 and 9,5j, i ll have to use 5mm or 10mm spacers in front?!

Im very in doubt about the correct offset, +22 or +35.

Just have to decide this to purchase the te37's.

Biggy VIII

For +35 and 9.5j you should use at least 7mm spacer, that should give you total of +28 offset and just enough coilover clearance in front (as +35 9j does). You can use 10mm spacer if you want, but that will offset your wheels further outside, and may need some fender job or some more camber to fit it good with wide rubber. I would say that there is no need for anything thicker than 7-8mm.

Anyway, I would recommend rolling the fender lip in the rear. This is an easy mod an you can do it yourself. Heat gun and rubber hammer will do the job.

Lambert

Thanks a lot BIGGY!

High_PSI

iTrader: (50)

Here are mine, I am actually thinking of getting rid of them, am I Crazy???

zk8913

Hey guys quick questions, 17x9 +22 on and 03 evo, im thinking i see that you do not need spacers to clear the brakes, can someone confirm that?

polish_pounder

iTrader: (8)

Ill post pictures once I get them on the car. Cannot wait!

High_PSI

iTrader: (50)

Best wheels EVER!!!!

Grimgrak

iTrader: (3)

Dreamy anyone have this in hyper bronze? black car.

Biggy VIII

No spacers needed.

I run 17x9 et35 without spacers.

polish_pounder

iTrader: (8)