Wheel Fitment PICTURES ONLY Thread
Mar 29, 2007, 10:53 PM
#17
wj4 is the guys's name
wheels: 18x9.5 advan tcII +35 offset I have a 2mm spacer in front because they the inner wheels were getting kind of close to the spring on the coil. I'm pretty much slammed with no finger gap. I'm lowered on Tanabe sustec coilover and at the absolutly lowest point in the rear, and I can go 10mm lower in the front.
tires: 245/40/18 tires, I know they are quite stretch, but I didn't want to have any rubbing issues and didn't want to roll my fenders.
fenders: I have driven my car with 3 passengers, and no rubbing at all. and yes, no modding fenders.
wheels: 18x9.5 advan tcII +35 offset I have a 2mm spacer in front because they the inner wheels were getting kind of close to the spring on the coil. I'm pretty much slammed with no finger gap. I'm lowered on Tanabe sustec coilover and at the absolutly lowest point in the rear, and I can go 10mm lower in the front.
tires: 245/40/18 tires, I know they are quite stretch, but I didn't want to have any rubbing issues and didn't want to roll my fenders.
fenders: I have driven my car with 3 passengers, and no rubbing at all. and yes, no modding fenders.
Last edited by trinydex; Apr 2, 2007 at 11:10 PM.
Mar 29, 2007, 10:57 PM
#20
wheels: 5Zigen Fn01r-c, 18x9.5, +35mm Offset, HyperBlack
tires: 255/35/18, BFGoodrich KDW2
suspension: Hotchkis Springs Drop: -1.5in Front/-1in Rear, No additional camber
fenders: Chargespeed Replica +10mm (not necessary just looks)
additional info: Barely clears the break calipers.
tires: 255/35/18, BFGoodrich KDW2
suspension: Hotchkis Springs Drop: -1.5in Front/-1in Rear, No additional camber
fenders: Chargespeed Replica +10mm (not necessary just looks)
additional info: Barely clears the break calipers.
Last edited by xLaNcErEvOx; Mar 29, 2007 at 11:01 PM.
The following users liked this post:
Evo8atlanta1 (Mar 7, 2021)
The following users liked this post:
Evo8atlanta1 (Mar 7, 2021)
Mar 29, 2007, 11:01 PM
#23
owner: R3dline
Wheels: Enkei RPF1 17x8.5 +30
Tires: Falken Azenis RT615 255/40/17
Suspension: Cusco Zero 2-E
fenders: No fender rolling, no spacers required! Minor rubbing on sharp U turns.
Wheels: Enkei RPF1 17x8.5 +30
Tires: Falken Azenis RT615 255/40/17
Suspension: Cusco Zero 2-E
fenders: No fender rolling, no spacers required! Minor rubbing on sharp U turns.
Last edited by trinydex; Apr 2, 2007 at 10:00 PM.
The following users liked this post:
Evo8atlanta1 (Mar 7, 2021)
Mar 29, 2007, 11:21 PM
#27
owner: GravelMR
Wheels : Ce28n Time Attack 18x9 +35
Tires : 265/35/18 Federal 595 RS
Suspension : JIC FLT-A2 Custom
Fenders : None. No Rubbing. (he says there's no rubbing... but i don't believe him... i mean look at the damn pictures)
Wheels : Ce28n Time Attack 18x9 +35
Tires : 265/35/18 Federal 595 RS
Suspension : JIC FLT-A2 Custom
Fenders : None. No Rubbing. (he says there's no rubbing... but i don't believe him... i mean look at the damn pictures)
Last edited by trinydex; Apr 2, 2007 at 09:53 PM.
