sette3

Is it ok to hear A Clicking noise when i press the breaks (not from the pedal but from the rear calipers ) ????

evo150

iTrader: (51)

is this only happening when you reverse? or when moving forward and reverse? have you changed your brake pads lately? there are some pads that are a mm or 2 smaller than the stock size and shift in the rear caliper (this usually only happens after the car has been sitting overnight or a long period of time and reverse out of your parking spot).

hondafan

iTrader: (25)

it happens on mine too. yeah, mostly in reverse or very slow speeds going forward like in traffic. i have hawk hps pads. must be the pads, didn't do it until i installed them.

tvbf1

iTrader: (1)

I'm experiencing the same event as well. Like evo150 said, it only happens after it sits for awhile or at low speed. I have the porterville pads from Gruppe-s, and if evo150 said is correct about the pad being a mm or 2 smaller then the stock Brembo. Then it's not really a big deal then right?

MasterNater

iTrader: (82)

I've been experiencing the same issue ever since I put on a set of Hawk HPS pads. The "click" only happens right when I push on the brake pedal after driving a short distance. Once it occurs, I can press the pedal repeatedly, and it never happens again. Drive a short distance, press the pedal, and it clicks again. It just sounds like the pads shifting in the caliper.

evo150

iTrader: (51)

did you peel the metal shim off of the stock pad and reuse them on the new pads?

ForgivenxSoulja

Hmm weird ive never herd anything like that