V1RGINEVO9

iTrader: (1)

So i have a 2006 evo 9 and a 91 gsx and got to doing some research and found a few interesting sites. Prob. old news but.... i saw that 2g's can run both the evo VIII/IX steering wheel and evo VIII/IX brakes with very little modification

My question is does anyone know anything or have pictures of a 1G with these modifications done? Is it possible? Here is the links to the websites i found.

I would assume the steering wheel is the same concept, cut and weld, but im more concerned about the brakes fitment.

Scroll Down for more pics
http://www.dsmtuners.com/forums/arti...wheel-dsm.html

2G's use galant knuckles and the rear brakes are a direct fit (no mod. necessary)
http://www.dsmtalk.com/forums/showthread.php?t=142337

Thanks!

sscottttt

iTrader: (4)

I put 2g 2 piston front calipers and rotors on my 1g back in the day and they bolted right up with no modifications necessary. So I would think that if the Evo Brembos fit on a 2g they would fit on a 1g just as easily, for the fronts anyway, not sure about the rears.

Good luck with the project!

V1RGINEVO9

iTrader: (1)

well for the 2g you have to change the knuckles and the galant knuckles dont line up with the tie rods... this is what i read...

Im considering just making adapters.
Is there any other brake upgrades i can do for my 91 GSX
Galant vr4 brakes?

turbolarry

iTrader: (1)

How about upgrading to the factory dual piston brakes?
http://www.vfaq.com/mods/BigBrakesInfo.html
http://www.vfaq.com/mods/BigBrakesInstall.html