Notices
Evo Tires / Wheels / Brakes / Suspension Discuss everything that helps make your car start and stop to the best of it's abilities.

Shaking steering wheel problem.

Old Feb 14, 2010, 02:28 PM
  #16  
Newbie
iTrader: (4)
 
goodies's Avatar
 
Join Date: Sep 2008
Location: n/e ohio
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
+1 on tie rod ends. i had a shake at 65 plus, and braking anywhere above 40mph. did the wheel shake test, took it apart and the outer tie rod ends were shot, after removing the nut they fell out no hammer needed. rotors are warped a touch but this cut my vibration or "shaking" by 80%
Old Feb 14, 2010, 05:55 PM
  #17  
Evolved Member
iTrader: (14)
 
huevosrancheros's Avatar
 
Join Date: Sep 2007
Location: The Stream Of Carol , IL
Posts: 1,095
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Force-Fed Performance
Pick the front of the car up.
put your hands at 9 and 3 on the tires and gently shake back and forth. If there feels like there is any "Play" you are looking at inner or outter tie rods.
Now put your hands at 12 and 6 and begin to push back and forth with each hand. If you feel "play" here you are looking at a hub assembly.

Take a pry bar or cro-bar and get under the car where the ball joints are. Pry between the spindle and lower control arm. If the lower ball joint is busted it will flex and be visible.
Old Feb 14, 2010, 06:08 PM
  #18  
Evolved Member
iTrader: (13)
 
ssg_petty_210's Avatar
 
Join Date: Feb 2009
Location: Texas
Posts: 1,187
Likes: 0
Received 1 Like on 1 Post
It isnt the pads. I have hawk pads and this doesnt happen. How is your wheel alignment. My friend has an VIII, shook very bad in his steering wheel. He got an allignment done and it was all good to go. Has your car been lowered with coils or coilovers? If it has, I would recommend an allignment if you havent already done so.
Old Feb 15, 2010, 03:47 PM
  #19  
Evolving Member
Thread Starter
iTrader: (2)
 
dvd_mi's Avatar
 
Join Date: Nov 2008
Location: Central Connecticut
Posts: 168
Likes: 0
Received 0 Likes on 0 Posts
NO it was not lowered. Tires are not getting an unusual wear. But anyway, can wheels go out of alignment by themselves???
Old Feb 18, 2010, 02:58 PM
  #20  
Evolving Member
Thread Starter
iTrader: (2)
 
dvd_mi's Avatar
 
Join Date: Nov 2008
Location: Central Connecticut
Posts: 168
Likes: 0
Received 0 Likes on 0 Posts
Can wheels go out of alignment by themselves??? By driving only???
Old Feb 18, 2010, 07:38 PM
  #21  
Evolved Member
 
barneyb's Avatar
 
Join Date: Jun 2006
Location: Grand Island, NE
Posts: 6,902
Received 144 Likes on 128 Posts
Originally Posted by dvd_mi
Can wheels go out of alignment by themselves??? By driving only???
Wheel weights can fall/get knocked off. I once found a shiny new one on my garage floor after new tires.

Unless the tires are cupped or have uneven wear, poor alignment shouldn't cause the steering wheel to shake.
Old Feb 18, 2010, 08:58 PM
  #22  
Evolved Member
iTrader: (49)
 
06RedRalli's Avatar
 
Join Date: Jul 2007
Location: Killeen,Tx
Posts: 869
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by dvd_mi
Can wheels go out of alignment by themselves??? By driving only???
Yes, due to road conditions...bumps...pot holes...and anything else the road offers causes the alignment to change...also changing tires it's recommended to get an alignment...
Old Feb 19, 2010, 11:57 AM
  #23  
Newbie
 
devinschultz's Avatar
 
Join Date: Feb 2010
Location: IL
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
had the same issue with my girls evo...noticed it after having some fun at the auto bahn in joliet, il. found a great price for brakes & rotors on ebay and replaced the cals as well and now its back to normal.
Old Feb 19, 2010, 07:13 PM
  #24  
Evolving Member
Thread Starter
iTrader: (2)
 
dvd_mi's Avatar
 
Join Date: Nov 2008
Location: Central Connecticut
Posts: 168
Likes: 0
Received 0 Likes on 0 Posts
If it would be caused by tie rods, which ones most likely??? Outer or inner??
Old Feb 19, 2010, 07:38 PM
  #25  
Evolved Member
 
barneyb's Avatar
 
Join Date: Jun 2006
Location: Grand Island, NE
Posts: 6,902
Received 144 Likes on 128 Posts
Originally Posted by dvd_mi
If it would be caused by tie rods, which ones most likely??? Outer or inner??
Well, you raise the car and check for play in the steering. If there is play then check the outer tie rod ends. You can see any movement. If they are okay then it has to be the inner or maybe play between the rack and pinion. I've also heard of the entire steering rack coming loose and moving.

All these things are kinda unlikely except the outer tie rod ends. I had to replace them on my DSM.
Old Mar 1, 2010, 04:04 PM
  #26  
Evolving Member
Thread Starter
iTrader: (2)
 
dvd_mi's Avatar
 
Join Date: Nov 2008
Location: Central Connecticut
Posts: 168
Likes: 0
Received 0 Likes on 0 Posts
It does not happen all the time. Sometimes it's OK. Its shaking mostly on the straights after the turns (on highway).
Old Mar 3, 2010, 07:52 AM
  #27  
Evolved Member
 
barneyb's Avatar
 
Join Date: Jun 2006
Location: Grand Island, NE
Posts: 6,902
Received 144 Likes on 128 Posts
Originally Posted by dvd_mi
It does not happen all the time. Sometimes it's OK. Its shaking mostly on the straights after the turns (on highway).
I'd suspect balance in this case.
Old Mar 5, 2010, 01:34 PM
  #28  
Evolved Member
iTrader: (5)
 
dan628's Avatar
 
Join Date: Aug 2005
Location: Sycamore, IL
Posts: 802
Likes: 0
Received 0 Likes on 0 Posts
The Perrin PSRS should help this problem, I have the same issue and plan on installing this kit really soon and will post back to let you all know if it does.
Old Mar 5, 2010, 01:50 PM
  #29  
Evolved Member
iTrader: (3)
 
italianevo88's Avatar
 
Join Date: Jun 2009
Location: south chicago IL
Posts: 679
Likes: 0
Received 0 Likes on 0 Posts
i had thrashed tires and it caused serious shaking so when i put the new tires on you could do 90 with no vibrations
Old Mar 6, 2010, 06:23 PM
  #30  
Evolving Member
iTrader: (25)
 
evowner17's Avatar
 
Join Date: May 2009
Location: Chicago
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
Do you have a pulsating brake pedal as well? check your rotor runout, shouldn't be more than .003".

Thread Tools
Search this Thread
Quick Reply: Shaking steering wheel problem.



All times are GMT -7. The time now is 06:12 AM.