9thpjay

Evo 9, 18X10.5 +15 TE37SL how will this be able to fit?
trying to do minimal camber/tire stretch as possible.

e_kobz

iTrader: (36)

Widebody kit

MinusPrevious

iTrader: (3)

^^^I agree

+15, especially in a 10.5 width, is impossible to fit (Properly) on a stock body EvO

e_kobz

iTrader: (36)

The most aggressive i've seen on a stock body Evo is 18x10.5 +30 with 265/35/18's. Camber was maxed out though and the rear had a modified trailing arm.

e_kobz

iTrader: (36)

https://www.evolutionm.net/forums/mo...-body-evo.html

OP refer to this thread. MinusPrevious and I both have chimed in on this topic in the past

Dallas J

iTrader: (1)

+15 wont work but +38 will but takes a lot of work. I have 18x10.5 +38 PF01 with 295 hoosiers and a front spacer. Was 20mm but looking to reduce that to 15mm.

It takes new rear trailing arms or accepting rub, about 3/4" of fender pulling, a few cuts in the fender lips for clearance, moving or trimming up to bolts, etc.

The 285s certainly fit much better being 1/2" shorter and negligibly narrower.