Overboost while Datalogging w/ Cobb AP
#1
Newbie
Thread Starter
iTrader: (7)
Join Date: Jul 2007
Location: Portsmouth, NH
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Overboost while Datalogging w/ Cobb AP
Took my friend's X out for a run. The car is stock except for a HKS Panel filter, Nisei UICP, and Cobb AP v2 running the HKS Stage 1 93 Oct Map. Here's what we saw...
Thoughts? These boost numbers seem way out of whack with what target boost is according to Cobb for this calibration (24psi +/- 0.8)! The car seems to drive fine with no issues, so when we saw these numbers we were a bit concerned.
Code:
Sec MPH RPM Knock Boost (PSI) 0 8.7 1946 0 17.55 0.29 8.7 2371 0 18.35 0.57 13.67 2727 0 19.87 0.88 13.67 3209 0 22.63 1.14 13.67 3680 0 26.32 1.42 21.13 4273 0 25.38 1.73 21.13 4396 0 4.5 2.01 26.1 4152 0 3.12 2.3 26.1 3765 0 15.59 2.56 26.1 3399 0 18.35 2.88 27.34 3614 0 24 3.16 27.34 3897 0 31.18 3.42 32.31 4251 0 37.64 3.71 32.31 4615 0 38.22 4.01 32.31 4996 0 35.68 4.29 41.01 5418 0 33.94 4.6 41.01 5769 0 33.36 4.9 48.47 6122 0 33.36 5.2 48.47 6471 0 33.36 5.46 54.68 6762 0 32.99 5.78 54.68 7075 0 14.79 6.07 54.68 6382 0 3.34 6.37 58.41 5372 0 19.29 6.66 58.41 5454 0 29.88 6.92 60.89 5502 0 38.8 7.21 60.89 5711 0 38.8 7.5 60.89 5868 0 36.11 7.8 65.87 6082 0 33.72 8.07 65.87 6297 0 32.99 8.36 70.84 6421 0.7 32.99 8.66 70.84 6637 0.35 33.14 8.95 70.84 6830 0.35 32.99 9.21 75.81 6388 0 7.98
Thread
Thread Starter
Forum
Replies
Last Post
Ian0611
ECU Flash
8
Oct 23, 2017 11:18 AM
alex_s817
Evo How Tos / Installations
14
Jun 16, 2014 06:18 PM