Too much knock?
#1
Newbie
Thread Starter
Join Date: Apr 2015
Location: Long Island, NY
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Too much knock?
I was doing a 3rd gear pull and the knock sum value on my AP jumped all the way to 6 at about 4000 rpm and 265 load. I was datalogging but I backed off as soon as I saw it.
I have never had this happen before, If I see knock it is usually only 1-3. For datalogging purposes should I have continued the pull to redline? Or was I smart to back off?
I have a log but I'm not sure if the link works: https://drive.google.com/file/d/0Bxm...ew?usp=sharing
Thanks
I have never had this happen before, If I see knock it is usually only 1-3. For datalogging purposes should I have continued the pull to redline? Or was I smart to back off?
I have a log but I'm not sure if the link works: https://drive.google.com/file/d/0Bxm...ew?usp=sharing
Thanks
#2
EvoM Guru
iTrader: (1)
do another few pulls and see if it repeats. If you typically get 1-3 counts, and got 6 counts on just one pull, its likely false knock, or just a blip that may not repeat itself..
Thread
Thread Starter
Forum
Replies
Last Post
thedru13
Evo Engine / Turbo / Drivetrain
3
Nov 3, 2014 08:58 AM
My03evo
Evo Engine / Turbo / Drivetrain
15
Feb 9, 2011 07:37 AM
Sschmuve1
Evo X Engine Management / Tuning Forums
2
May 12, 2009 09:00 AM