Mikami

Okay so i've rummaged all the evom e85 threads there are and had lots of mixed experiences.

Lets break it down:

Injectors:
850 - Just enough but on the limit for E85
- Deatsch Werks 850cc
1000 - Good for E85 but not for future turbo upgrade
- Deatsch Werks 1000cc
- Injector Dynamics 1000cc
1100/1200/1300 - Good for E85 and Turbo
- Deatsch Werks 1300cc
- Injector Dynamics 1300cc

Pumps:
DW65c - Good for Stock E85 but Seeing people with Lean issues
DW300 (BlaqOps kit) - Seen lots of people with issues with blaqops kits (especially with the non-e85 submersible fuel line)
Walbro255 (BlaqOps kit) - Seen lots of people with issues with blaqops kits
AEM320(e85) - Heard good things but requires cutting wires / etc

Link to Blaqops Non-E85 Line Replacement
http://www.oreillyauto.com/site/c/de...0887&ppt=C0222

Some people use the Mod to switch maps
Others use AP's

Also concerns with the Filter/Sock, with E85 clogging it fast if its the paper-version

As for my setup mods will be the following:
ETS midpipe
ETS downpipe
ETS exhaust
AP V3
AMS Intake
AMS UICP


So Would I only need
E85 Fuel Pump/lines etc package
&
Injectors

or is there something else?

Also, Thoughts on the above mentioned Pumps/Injectors?
Sock/Filter Concerns/Recommendations?

Which are the best, and are there any kits or new ones out now?

Actually been awhile since the last e85 list out / break down thread

LOVEMYX

iTrader: (2)

There are a few people that have run DPI Injectors on e85 with great success. I plan on using there 1200cc Injectors and going with a DPI e85 pump as well.

Mikami

Mind if i ask why you chose DPI over others?

LOVEMYX

iTrader: (2)

1) They give a 2 year warranty which also includes 1 free cleaning service within those 2 years!

2) They Flow match every set!

3) The Customer Service

MashX

Well, FIC, ID also flow match.
But ID is much more consistent and have full data to dial it in the tune properly.

hispanicpanic

can you provide a link about the dw65 not providing enough flow for e85??

Ev0ikon

iTrader: (18)

How about the new FIC injectors that are stainless interior?

hispanicpanic

Hey you should post this on evox forums. THere are a lot more technically oriented people on that forum.

basher519

iTrader: (1)

I have id2000's with an aem e85 320 lph pump (pump that Jon/Chris @ 5150 recommended and not the evo x specific one) and seems to work fine so far. Pump/all parts/install was like 200?