Vaughn Performance EVO X Master Parts Thread
#1
Newbie
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Southern California
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Vaughn Performance EVO X Master Parts Thread
Hey everybody. This is going to be the Vaughn Performance EVO X parts Master thread. Like our other master threads rather then taking down and putting up new threads all the time this one will just grow in length as more and more parts become available, SO MAKE SURE TO LOOK THROUGH ALL PAGES when there becmre more then one!!!
Thanks,
Anthony Vauhgn
Phone: 818-395-9342
e-mail; tarmacsoul@hotmail.com
PLEASE PM FOR PRICING ON ALL OF THE FOLLOWING!!
Thanks,
Anthony Vauhgn
Phone: 818-395-9342
e-mail; tarmacsoul@hotmail.com
PLEASE PM FOR PRICING ON ALL OF THE FOLLOWING!!
#2
Newbie
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Southern California
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
INJEN SHORT RAM-INCLUDES UPPER I/C PIPING-inj-sp1899
ARC SUPER INDUCTION BOX
ARC TITANIUM CAT BACK
AVAILABLE AS CATBACK OR AXLEBACK
GREDDY 80MM TI EXHAUST
HKS LEGAMAX
HKS EXHAUST TIP HEAT SHIELD
JUST IN FROM HKS!!!
EVO X MIDPIPE
SHOOT ME A PM FOR PRICING
ARC SUPER INDUCTION BOX
ARC TITANIUM CAT BACK
AVAILABLE AS CATBACK OR AXLEBACK
GREDDY 80MM TI EXHAUST
HKS LEGAMAX
HKS EXHAUST TIP HEAT SHIELD
JUST IN FROM HKS!!!
EVO X MIDPIPE
SHOOT ME A PM FOR PRICING
Last edited by Vaughn Performance; Aug 11, 2008 at 03:21 PM.
#3
Newbie
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Southern California
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
lots more stuff going up maybe tommorow out of time today, pm for anything you dont see up yet (which is a freakin bunch right now LOL!!).
Phone: 818-395-9342
e-mail: tarmacsoul@hotmail.com
Phone: 818-395-9342
e-mail: tarmacsoul@hotmail.com
Trending Topics
#8
Newbie
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Southern California
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Full Line of clutch kitsfrom ACT and Exedy AVAILABLE NOW!!
I know you guys (and girls) will all start increasing the power levels of your x soon and will be in need of some extra holding power and durability from your clutches.
Heres ACT"S offering
Full Face friction disc kits(by act part#)
ACT-ME1-HDSS (sprung)
ACT-ME1-XTSS (sprung)
ACT 6 PUCK DISC KIT'S
ACT-ME1-HDG6 ( sprung and unsprung available)
ACT-ME1-XTG6 (sprung and unsprung available)
(FOUR PAD FULL RACE VERSION OF ALL ABOVE CLUTCH KITS AVAILABLE IN SPRUNG AND UNSPRUNG SET UP'S)
Heres what Exedy has to offer so far
EXD-05803A (Stage 1)
Or
Exedy stage 2 kits
EXD-05952A
I know you guys (and girls) will all start increasing the power levels of your x soon and will be in need of some extra holding power and durability from your clutches.
Heres ACT"S offering
Full Face friction disc kits(by act part#)
ACT-ME1-HDSS (sprung)
ACT-ME1-XTSS (sprung)
ACT 6 PUCK DISC KIT'S
ACT-ME1-HDG6 ( sprung and unsprung available)
ACT-ME1-XTG6 (sprung and unsprung available)
(FOUR PAD FULL RACE VERSION OF ALL ABOVE CLUTCH KITS AVAILABLE IN SPRUNG AND UNSPRUNG SET UP'S)
Heres what Exedy has to offer so far
EXD-05803A (Stage 1)
Or
Exedy stage 2 kits
EXD-05952A
Last edited by Vaughn Performance; Jul 23, 2008 at 03:10 PM.
#9
Newbie
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Southern California
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Heres some quality damper solutions for the EVO X
Finally a fully adjustable coilover kit for the EVO X owner that is suitable for heavy street driving as well as light track use.
The JIC FLT-FAS is a coilover suspension set up ideal for the enthusiast that will use the suspension on a daily basis and occasionally for the track. FLT-FAS features a 10 way adjustable damper. For strength, strut-type suspensions feature a wide shaft while multi-link type suspensions feature the smaller shaft damper.
FLT-FAS include front pillow ball upper mounts and front adjustable camber plates.
Also included are springs of the linear-type for laser precision handling and adjustable lower brackets for ride height adjustments that do not affect damper travel.
Also Available
HARD Core Coilovers, fully adjustable!
COILOVER JIC EVO 10 HARD
JIC-CZ4FLTA2H
Personally my favorite option for the x right now
KW suspensions announces their Variant 3 stainless steel constructed coilover for the 2008 Mitsubishi EVO X.
The KW suspensions coilover enables the owner to lower their vehicle 10 to 50mm on the front axle and 35 to 65mm on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving. Adjustable low speed rebound and compression are independent reacting, while the high-speed set-up has been pre-set by KW engineers.
All KW coilovers pass stringent German TUV safety and quality testing standards. Each kit is sold TUV approved.
Spring Rates for Evo X:
90nm in front (514Lbs)
80nm in rear (457Lbs)
• Independently adjustable damping technology -rebound and compression damping
• "inox-line" stainless steel technology
• Individual height adjustment
• German TUEV-tested adjustment parameters
• High-quality components for long life
• Comprehensive documentation for ease of use
• Infinitely adjustable rebound damping
• 14- level adjustable compression damping
• Unique, independently functioning damping power adjustment
Finally a fully adjustable coilover kit for the EVO X owner that is suitable for heavy street driving as well as light track use.
The JIC FLT-FAS is a coilover suspension set up ideal for the enthusiast that will use the suspension on a daily basis and occasionally for the track. FLT-FAS features a 10 way adjustable damper. For strength, strut-type suspensions feature a wide shaft while multi-link type suspensions feature the smaller shaft damper.
FLT-FAS include front pillow ball upper mounts and front adjustable camber plates.
Also included are springs of the linear-type for laser precision handling and adjustable lower brackets for ride height adjustments that do not affect damper travel.
Also Available
HARD Core Coilovers, fully adjustable!
COILOVER JIC EVO 10 HARD
JIC-CZ4FLTA2H
Personally my favorite option for the x right now
KW suspensions announces their Variant 3 stainless steel constructed coilover for the 2008 Mitsubishi EVO X.
The KW suspensions coilover enables the owner to lower their vehicle 10 to 50mm on the front axle and 35 to 65mm on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving. Adjustable low speed rebound and compression are independent reacting, while the high-speed set-up has been pre-set by KW engineers.
All KW coilovers pass stringent German TUV safety and quality testing standards. Each kit is sold TUV approved.
Spring Rates for Evo X:
90nm in front (514Lbs)
80nm in rear (457Lbs)
• Independently adjustable damping technology -rebound and compression damping
• "inox-line" stainless steel technology
• Individual height adjustment
• German TUEV-tested adjustment parameters
• High-quality components for long life
• Comprehensive documentation for ease of use
• Infinitely adjustable rebound damping
• 14- level adjustable compression damping
• Unique, independently functioning damping power adjustment
Last edited by Vaughn Performance; Jul 23, 2008 at 03:33 PM.
#10
Newbie
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Southern California
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Hey everyone we're back in town and open for business again today. We placed second in our time attack class and our fellow shop placed firts in thier drift event!!