Best Mods for Evolution IX - evolutionm.net
evolutionm.net - Home of the Lancer Evolution  

Go Back   > >
Log In 


EvoM Newbie / FAQs Forum New member? Come on in, introduce yourself, and get acquainted with the evolutionm.net posse :) FAQs will also be answered in here.

Best Mods for Evolution IX

Reply
 
 
 
Thread Tools Search this Thread
Old Mar 26, 2010, 09:01 PM   #1
Newbie
Thread Starter
 
Join Date: Mar 2010
Location: Orlando
Posts: 0
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: Unknown

Best Mods for Evolution IX

I know there has been a million threads upon this topic but no matter how much I research the mods, I can't seem to get accurate hp gains for the evo ix. My layout for the best mods for the best gains...according to the tons of dyno sheets I have looked at for the evolution IX are as followed.

Injen intake w/ Upper and Lower Intercooler Piping
Megan Exhaust, Downpipe, & Tailpipe
Walbro 255 Fuel Pump (not a gain, necessity mod)
HKS 272 Cams
Megan Exhaust Manifold
Megan O2 housing or TTP's O2 housing (heard Megan's tend to crack)
Turbo XS Intercooler
Any MBC or EBC (seems to be preference nowadays...)
Forge RS BOV (Hks ssqv sounds nice...but to many problems)
***Trying to refrain from E85 injection on 800cc injectors?***
TTP tune by far seems to be digging power out of each one of these mods...

I am trying to hit as close to 400 hp as possible on stock turbo and stock block. I also do not want to use E85 or meth injection as a means for power as I heard it would not be good for the engine in the long run...I also understand that I need bigger injectors if I want to upgrade my turbo. No need for an FP red or anything drastic such as that as I am trying to stay close to N/A as possible.

My question in the end is, can I really hit close to 400 hp with these mods?

Can I stay on stock internals with these mods?

Do I really need E85 or Meth injection with 800cc injectors do get the biggest gains?

Please share your insight...and enlighten me as this is my first post.
Offline
 
Reply With Quote
Old Mar 26, 2010, 09:08 PM   #2
Evolving Member
iTrader: ( 6 )
 
aaevol9's Avatar
 
Join Date: Jul 2009
Location: Nor Cal
Posts: 105
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: Evo X

What type of dyno are you tryen to hit 400 on a dynojet of mustang?
Offline
 
Reply With Quote
Old Mar 26, 2010, 09:09 PM   #3
Evolving Member
iTrader: ( 9 )
 
GdotRegEvo9's Avatar
 
Join Date: Aug 2009
Location: CT
Posts: 249
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: 2006 EB Evo9, 2006 TB Evo9 (Sold)

Kelford or GSC CAMS and ETS 3.5 FMIC and that sounds better. yu will not hit 400 with just those. ive accually heard of one person hitting 400 on stock turbo.
Offline
 
Reply With Quote
Old Mar 27, 2010, 06:01 PM   #4
Newbie
Thread Starter
 
Join Date: Mar 2010
Location: Orlando
Posts: 0
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: Unknown

Quote:
Originally Posted by GdotRegEvo9 View Post
Kelford or GSC CAMS and ETS 3.5 FMIC and that sounds better. yu will not hit 400 with just those. ive accually heard of one person hitting 400 on stock turbo.
On a mustang dyno most definitely as ttp seems like the place to be for these type of mods. Are you saying that with those cams and that FMIC it is possibly to hit 400 hp on stock turbo? And the person you heard of hitting 400 on stock turbo...what mods not noted in this thread, helped him accomplish that?
Offline
 
Reply With Quote
Old Mar 28, 2010, 09:05 AM   #5
Newbie
Thread Starter
 
Join Date: Mar 2010
Location: Orlando
Posts: 0
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: Unknown

bump for not much advice given to one in need
Offline
 
Reply With Quote
Old Mar 30, 2010, 02:27 PM   #6
Evolving Member
 
Join Date: Feb 2008
Location: SoCal
Posts: 254
Thanks: 0
Thanked 1 Time in 1 Post

Drives: 06 GG Evo IX MR

The Mustang dyno is a low-reading dyno, which has helped earn it the nickname "the heartbreaker". A stock Evo only reads a little over 200whp on a Mustang dyno. You're not going to double the stock power with a few bolt-ons and a tune.

TTP has already stated above that they would be happy to help. Why not call them up and discuss your whp goals, your budget, and let them suggest the most cost effective upgrade path?
Offline
 
Reply With Quote
Old Nov 9, 2010, 02:25 PM   #7
Newbie
 
Join Date: Aug 2010
Location: Colorado Springs, co
Posts: 0
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: 2006 evo ix

I actually hit. 410awhp in Denver at 6000 elevation on a stock IX Turbo. No cams.... but the Nick name for my car is freak of nature Evo. No idea how with just. Ets I/c n pipes with 880 n a tune on e85 of course there's the usually tbe n NBC
Offline
 
Reply With Quote
Old Nov 9, 2010, 02:27 PM   #8
Newbie
 
Join Date: Aug 2010
Location: Colorado Springs, co
Posts: 0
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: 2006 evo ix

Ohh that that's on a mustang dyno too. But its also with correction factor for elevation iam not sure exactly now much but in a full weight n interior car on bald tires n heavy Evo x. Wheels n missing 2 **** points I made a 11.9 pass at 114.5 MPH then it rained out n track close
Offline
 
Reply With Quote
Old Nov 9, 2010, 02:35 PM   #9
Evolving Member
iTrader: ( 6 )
 
Tuxevo's Avatar
 
Join Date: Aug 2010
Location: Silver Spring, MD
Posts: 455
Thanks: 0
Thanked 3 Times in 1 Post

Drives: WW IX RS

I was looking at your list of parts and had to check the post date. I assumed this was a thread brought back from pre 2007.
Intake: Perrin
Licp: ets v2
Uicp: whatevers 150 or less in the f/s section
Fmic: ETS, AMS or buschur (spell check?)
Cams: GSC S2 or FP4r
Exhaust: Something that clears the ACD and is 3"
O2 housing: titek or invidia
Exhaust manifold: Ported stocker
Fuel pump: walboro 255 hp
Tune: AWD

Try that, better parts, more power, better reputation.
Offline
 
Reply With Quote
Old Nov 14, 2010, 10:42 PM   #10
Evolving Member
iTrader: ( 5 )
 
Sacevo9mr's Avatar
 
Join Date: Aug 2010
Location: 916
Posts: 125
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: Evo IX MR

to go with your comment on hks ssqv, i was boosting 22 psi couple weeks ago and it blew the flange right off, left me to put it back together on the road.. After all that i still have it on there just because it sounds nice ..

As far as gain and hp every car is going to act different, i would love to know whats needed just as much as you
Offline
 
Reply With Quote
Old Nov 15, 2010, 06:02 AM   #11
Newbie
iTrader: ( 3 )
 
skipperbrent's Avatar
 
Join Date: Apr 2010
Location: odenville, al
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: 1984 Mustang SVO

so who is the bes to get a tune with? and what is required?
Offline
 
Reply With Quote
Old Nov 15, 2010, 09:14 AM   #12
Evolving Member
iTrader: ( 6 )
 
gkania's Avatar
 
Join Date: Dec 2004
Location: Deltona
Posts: 489
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: 038

Injen intake w/ Upper and Lower Intercooler Piping
Megan Exhaust, Downpipe, & Tailpipe
Walbro 255 Fuel Pump (not a gain, necessity mod)
Kelford TX272 cams
Ported Stock Manifold
Megan O2 housing- manifolds crack, not O2 housings
Turbo XS Intercooler or ETS
Perrin 3 port boost solenoid and ECU controlled boost
Forge RS BOV or Evo15 valve
***Trying to refrain from E85 injection on 800cc injectors?***
You will need 1000cc minimum for E85 but it is the best and cleanest fuel available.
TTP tune by far seems to be digging power out of each one of these mods...

This is what would change in your list... 400whp on a Mustang Dyno is possible however you WILL need high octane such as E85 to get there. E85 is actually way better for your car than gasoline as it runs the engine cooler and keeps the engine clean inside.
Offline
 
Reply With Quote
Old Nov 15, 2010, 06:01 PM   #13
EvoM Moderator
iTrader: ( 26 )
 
kyoo's Avatar
 
Join Date: May 2006
Location: US
Posts: 5,319
Thanked 4 Times in 4 Posts

Drives: IX

not related to power but...

http://forums.evolutionm.net/evo-eng...ound-here.html
Offline
 
Reply With Quote
Old Nov 15, 2010, 07:00 PM   #14
Former Sponsor
iTrader: ( 98 )
 
Vivid Racing's Avatar
 
Join Date: Feb 2003
Location: Gilbert, AZ
Posts: 4,259
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: EVO VIII|IX|X, S13, 350z, 370z, R35, S2K, M3, M5,C63 AMG, 997TT, 360 Modena

Quote:
Originally Posted by skipperbrent View Post
so who is the bes to get a tune with? and what is required?
are you looking for a tune for an ix? do you have any mods?

-anthony
Offline
 
Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
TSCOMP TUNED strikes again 395hp/363tq almost stock Evo 9 Fireescape Evo Dyno Tuning and Results 41 Dec 13, 2013 06:17 AM
TTP BUILT 550HP RED+METH Evo IX Evo2wIsh4 Evo Dyno Tuning and Results 42 Apr 13, 2009 07:06 AM
Evolution IX HP guess RapidSpark Evo Dyno Tuning and Results 13 Apr 2, 2009 08:44 PM
Upgrade Path\Mod List for an FP Red on 93 Pump Gas and Meth Injection sbr-drive Evo Engine / Turbo / Drivetrain 39 Mar 30, 2009 08:09 AM
TTP-Engineering June Products Blowout! TTP Engineering Evo 'For Sale' Engine Internals and Drivetrain 49 Aug 2, 2007 12:52 PM


Tags
400, basic, build, evo, evolution, forum, gains, horsepower, hp, ix, mod, mods, mr, stock, upgrades

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -7. The time now is 08:17 AM.