EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Lancer Aftermarket Forced Induction Tech Discuss forced induction related specs and upgrades for custom aftermarket setups.

turbocharge project question

Thread Tools
 
Search this Thread
 
Old Jul 9, 2015, 08:07 AM
  #16  
Evolved Member
iTrader: (11)
 
jakermeister's Avatar
 
Join Date: Sep 2006
Location: Colorado
Posts: 1,194
Likes: 0
Received 2 Likes on 2 Posts
Here's a link to those automatic roms. Be sure to download the XML file as well as the 05-07 rom. There's also a SD (speed density) rom if you plan to run sd. Let us know if you have any questions.

https://www.evolutionm.net/forums/la...-map-roms.html
jakermeister is offline  
Reply Like
Old Jul 10, 2015, 03:23 PM
  #17  
Newbie
Thread Starter
 
thenatureboyjs's Avatar
 
Join Date: Mar 2010
Location: montreal, canada
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CrAnSwIcK
when does the gauge display dashes? at idle? all the time? does it change at all when you apply a bit of throttle?


for an AEM wideband, three dashes indicates an AFR above 18 which is VERY lean, and you should only see that briefly when you let off the throttle...
the wideband is not on right now, is the bosst gauge the problem , it's akways ib --- whenever
thenatureboyjs is offline  
Reply Like
Old Jul 10, 2015, 08:46 PM
  #18  
Evolved Member
iTrader: (5)
 
CrAnSwIcK's Avatar
 
Join Date: Sep 2010
Location: Ontario, Canada
Posts: 7,472
Received 89 Likes on 86 Posts
Originally Posted by thenatureboyjs
the wideband is not on right now, is the bosst gauge the problem , it's akways ib --- whenever

are you absolutely sure the gauge is hooked up properly? re-check your wiring...
CrAnSwIcK is offline  
Reply Like
Old Aug 23, 2015, 05:20 PM
  #19  
Newbie
Thread Starter
 
thenatureboyjs's Avatar
 
Join Date: Mar 2010
Location: montreal, canada
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
the car was working fine on friday, yesterday it start to stall when iddle , i can't even start it if my foot is not on the gaz, do you guy have a idea what is the problem ?
it appen when we was working on the map, after we put back the starting map ans still no working
Last edited by thenatureboyjs; Aug 23, 2015 at 05:26 PM.
thenatureboyjs is offline  
Reply Like
Old Aug 23, 2015, 09:21 PM
  #20  
Evolved Member
iTrader: (5)
 
CrAnSwIcK's Avatar
 
Join Date: Sep 2010
Location: Ontario, Canada
Posts: 7,472
Received 89 Likes on 86 Posts
Originally Posted by thenatureboyjs
the car was working fine on friday, yesterday it start to stall when iddle , i can't even start it if my foot is not on the gaz, do you guy have a idea what is the problem ?
it appen when we was working on the map, after we put back the starting map ans still no working

what changed?
CrAnSwIcK is offline  
Reply Like
Old Aug 24, 2015, 01:53 PM
  #21  
Newbie
Thread Starter
 
thenatureboyjs's Avatar
 
Join Date: Mar 2010
Location: montreal, canada
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CrAnSwIcK
what changed?
don't remember exactly , maybe injector and the iddle rpm and we put back the tune i was having the morning that was working fine and still have the problem, maybe is a vaccuum problem?
thenatureboyjs is offline  
Reply Like
Old Aug 25, 2015, 06:06 AM
  #22  
Evolved Member
iTrader: (5)
 
CrAnSwIcK's Avatar
 
Join Date: Sep 2010
Location: Ontario, Canada
Posts: 7,472
Received 89 Likes on 86 Posts
it could be a vacuum leak, or your IAC valve, or MAF, throttle body etc.
CrAnSwIcK is offline  
Reply Like
Old Aug 26, 2015, 02:59 PM
  #23  
Newbie
Thread Starter
 
thenatureboyjs's Avatar
 
Join Date: Mar 2010
Location: montreal, canada
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CrAnSwIcK
it could be a vacuum leak, or your IAC valve, or MAF, throttle body etc.
i check whit my scan gauge, and i don't have any map reading, can i be the map sensor ?
thenatureboyjs is offline  
Reply Like
Old Aug 26, 2015, 03:09 PM
  #24  
Evolved Member
iTrader: (5)
 
CrAnSwIcK's Avatar
 
Join Date: Sep 2010
Location: Ontario, Canada
Posts: 7,472
Received 89 Likes on 86 Posts
could be...but if it failed it should have thrown a code...
CrAnSwIcK is offline  
Reply Like
Old Aug 31, 2015, 04:44 PM
  #25  
Newbie
Thread Starter
 
thenatureboyjs's Avatar
 
Join Date: Mar 2010
Location: montreal, canada
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CrAnSwIcK
could be...but if it failed it should have thrown a code...
got the sensor 1 bank 1 code, change the oxygen sensor din't change anything, my vacuum stay at -24 and don't move , seriously i dont know how to chek the acc valve ou the map sensor or whetever
thenatureboyjs is offline  
Reply Like
Old Aug 31, 2015, 08:25 PM
  #26  
Evolved Member
iTrader: (5)
 
CrAnSwIcK's Avatar
 
Join Date: Sep 2010
Location: Ontario, Canada
Posts: 7,472
Received 89 Likes on 86 Posts
Originally Posted by thenatureboyjs
got the sensor 1 bank 1 code, change the oxygen sensor din't change anything, my vacuum stay at -24 and don't move , seriously i dont know how to chek the acc valve ou the map sensor or whetever

when you go wide open throttle you don't get zero psi?
CrAnSwIcK is offline  
Reply Like
Old Sep 1, 2015, 12:57 PM
  #27  
Newbie
Thread Starter
 
thenatureboyjs's Avatar
 
Join Date: Mar 2010
Location: montreal, canada
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CrAnSwIcK
when you go wide open throttle you don't get zero psi?
I don't know my boost gauge don't work on boost , but i got the boost, i know it by power, put i don't have problem if I roll normaly, i just can't iddle on a stop, light or whatever
thenatureboyjs is offline  
Reply Like
Old Sep 1, 2015, 03:51 PM
  #28  
Newbie
Thread Starter
 
thenatureboyjs's Avatar
 
Join Date: Mar 2010
Location: montreal, canada
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
i test out the map, whit the outlander map and still not work, i chek the iac valve i got open loop on the terminal ( on my tester)
thenatureboyjs is offline  
Reply Like
Old Sep 1, 2015, 10:23 PM
  #29  
Evolved Member
iTrader: (5)
 
CrAnSwIcK's Avatar
 
Join Date: Sep 2010
Location: Ontario, Canada
Posts: 7,472
Received 89 Likes on 86 Posts
get your boost gauge working...
CrAnSwIcK is offline  
Reply Like
Old Sep 2, 2015, 01:19 PM
  #30  
Newbie
Thread Starter
 
thenatureboyjs's Avatar
 
Join Date: Mar 2010
Location: montreal, canada
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CrAnSwIcK
get your boost gauge working...
it give me my vaccum and the car can't iddle so who care about the bosst if i can even drive good, after i got the solution for my iddle gonna chek the boost gauge
thenatureboyjs is offline  
Reply Like



Advanced Search
Quick Reply: turbocharge project question


Reply Closed Thread Share

All times are GMT -7. The time now is 01:26 AM.