2003 Factory Anti-theft
Dec 23, 2004, 10:39 PM
#1
Newbie
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
2003 Factory Anti-theft
Hey guys, I'm completely lost with this whole bit.
I own a 2003 Lancer ES and I've got alarm/keyless entry hooked up on the car. I now have time to get the remote start on the car. Problem is, I'm studying the car and places say that the car has a built-in factory anti-theft system, Transponder. Other places say the car doesn't have it. I don't know which to believe! Does the 2003 Lancer ES have this equipped?
I know that the EvoVIII's have the Immobilizer that has the key have a "chip" inside. Some places say that the Standard Lancers have an RF system that detects the key in the ignition, also known as the Transponder system.
Can anyone tell me, is there Transponder in the car or no?
Anyone who installed remote start on their 2002-03 Lancers need to have a Transponder bypass installed? Your help is much abilged. Thank yoU!
I own a 2003 Lancer ES and I've got alarm/keyless entry hooked up on the car. I now have time to get the remote start on the car. Problem is, I'm studying the car and places say that the car has a built-in factory anti-theft system, Transponder. Other places say the car doesn't have it. I don't know which to believe! Does the 2003 Lancer ES have this equipped?
I know that the EvoVIII's have the Immobilizer that has the key have a "chip" inside. Some places say that the Standard Lancers have an RF system that detects the key in the ignition, also known as the Transponder system.
Can anyone tell me, is there Transponder in the car or no?
Anyone who installed remote start on their 2002-03 Lancers need to have a Transponder bypass installed? Your help is much abilged. Thank yoU!
Dec 24, 2004, 11:16 AM
#3
Evolved Member
iTrader: (10)
Join Date: Jan 2002
Location: BEANTOWN FOREVER
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
no transponder, just finished installing my remote starter......what a scary set up i have. I dont think my car is getting stolen anytime soon, and if they steal it they deserve it.
Dec 24, 2004, 09:22 PM
#5
Newbie
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
So if I have the ES wiring diagram and the diagram to the remote starter, everything will connect no problem? I don't need to bypass anything? Do I still need to ground the keysense wire?
Tell me what wires you had to use when you installed your remote starter? The important ones..
Tell me what wires you had to use when you installed your remote starter? The important ones..
Dec 24, 2004, 09:53 PM
#6
Evolving Member
iTrader: (1)
Join Date: Oct 2004
Location: America's Finest City
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Keysense is the blue wire in the ingition harness... depending on the alarm system, it's not required for remote start...
as far as remote start goes... you need:
*12V constant - white
*Starter - black/yellow
*Ignition - black/white
*ACC 1 - blue/black
*ACC 2 - blue/white
*NEUTRAL SAFETY SWITCH - requires ground input for most remote start systems
*Status output from the main alarm module to the remote start module
Those are the major ones assuming you have everything else in the alarm hooked up...
as far as remote start goes... you need:
*12V constant - white
*Starter - black/yellow
*Ignition - black/white
*ACC 1 - blue/black
*ACC 2 - blue/white
*NEUTRAL SAFETY SWITCH - requires ground input for most remote start systems
*Status output from the main alarm module to the remote start module
Those are the major ones assuming you have everything else in the alarm hooked up...
Last edited by DaGuL; Dec 24, 2004 at 09:56 PM.
Thread
Thread Starter
Forum
Replies
Last Post
vizi0n
Lancer Troubleshooting
1
Oct 11, 2016 02:53 PM
mrbkkt1
Evo How To Requests / Questions / Tips
17
Mar 11, 2013 04:40 PM
kronic420haze
Lancer Audio and Security (All models)
4
Feb 6, 2010 10:00 PM
