Notices
Lancer General Come on in and discuss the US Lancer.

Need some help please

Thread Tools
 
Search this Thread
 
Old Apr 24, 2003, 04:44 PM
  #1  
Newbie
Thread Starter
 
Kralster's Avatar
 
Join Date: Dec 2002
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Need some help please

I have already unscrewed the center cupholder storage cubby. I have taken out the two screws to the center console where the automatic shifter starts. I can't seem to get the two, screw-like clips near the furthest front part of the car on both the passenger and driver side. (they are black in color sort of feel like nails but i'm assuming they are some kind of clip.) I don't want to break them for fear that i wouldn't be able to get it back together. I'm just trying to get to the cigarette lighter to connect some neons. Any help would be awesome!

If you have no idea what i'm talking about the picture shows what i'm trying to take off. I have already searched for this information and could not find adequete info.
Attached Images  
Old Apr 24, 2003, 06:21 PM
  #2  
Newbie
Thread Starter
 
Kralster's Avatar
 
Join Date: Dec 2002
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Surely someone knows how to do it?
Old Apr 24, 2003, 06:31 PM
  #3  
Evolving Member
iTrader: (1)
 
theaphextwin84's Avatar
 
Join Date: Oct 2002
Location: University of Rochester, NY
Posts: 253
Likes: 0
Received 0 Likes on 0 Posts
a hammer and a crow bar

sorry I really don't know how to sorry.
Old Apr 24, 2003, 06:33 PM
  #4  
Newbie
Thread Starter
 
Kralster's Avatar
 
Join Date: Dec 2002
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Smile

..thanks but i need a little more
Old Apr 24, 2003, 06:42 PM
  #5  
EvoM Guru
iTrader: (26)
 
Boeturbolancer's Avatar
 
Join Date: Dec 2002
Location: Hemet, CA
Posts: 2,791
Likes: 0
Received 1 Like on 1 Post
sounds like your talking about the side pieces in the front of the console. They each have a visible expansion clip with a phillips head cutout. Use a phillips head to unscrew them till they won't go no more. Then you can pull them out by hand. The pieces then pull out by hand as well... there are clips holding them in but they give when you pull on them without breaking. After you get those pieces off you will see the pop-in type expansion pins that hold the console in place. Take those out from both sides and the front is free. Don't forget there should be a screw under the ashtray holding the console in. Just remove ashtray and you'll see it. Hope this helps and is what you were looking for. Good luck
Old Apr 24, 2003, 06:49 PM
  #6  
Evolving Member
iTrader: (5)
 
J'sLancerLS's Avatar
 
Join Date: Mar 2003
Location: San Diego, CA
Posts: 445
Likes: 0
Received 0 Likes on 0 Posts
Boe is sooooooooo f**king SMART! I'm telling you, he is a whiz with these cars!
Old Apr 24, 2003, 08:38 PM
  #7  
EvoM Guru
iTrader: (26)
 
Boeturbolancer's Avatar
 
Join Date: Dec 2002
Location: Hemet, CA
Posts: 2,791
Likes: 0
Received 1 Like on 1 Post
How my di@# taste "J"... just kidding man. I'm not smart just been doing a lot of things to the lancer. Yes i'm inventive, yes i'm experienced but far from smart... hell if it wasn't for RRM my lancer would be stock thru and thru. But thanks for the props "J" wish you could go to SCLC meet sat. Your a funny ***** that is fo-sho!
Old Apr 24, 2003, 10:57 PM
  #8  
Evolving Member
iTrader: (5)
 
J'sLancerLS's Avatar
 
Join Date: Mar 2003
Location: San Diego, CA
Posts: 445
Likes: 0
Received 0 Likes on 0 Posts
Thats right baby, I'm funny! Ya, funny looking!

Old Apr 25, 2003, 12:07 AM
  #9  
EvoM Guru
iTrader: (26)
 
Boeturbolancer's Avatar
 
Join Date: Dec 2002
Location: Hemet, CA
Posts: 2,791
Likes: 0
Received 1 Like on 1 Post
Seriously though did this help you out Kralster??
Old Apr 25, 2003, 10:08 AM
  #10  
Newbie
Thread Starter
 
Kralster's Avatar
 
Join Date: Dec 2002
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Yes it helped me out a lot, i got her done. Just needed to get to the cigarette lighter to hook up some neons.

thanks again
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew Leinen
Lancer How Tos / Installations
1
Jan 30, 2017 05:22 PM
broody
09+ Ralliart How-To/Installations
3
Nov 6, 2011 11:24 AM
JPooah
Evo Engine / Turbo / Drivetrain
9
Sep 29, 2008 07:10 PM
CBRD
Evo Engine / Turbo / Drivetrain
31
Sep 27, 2007 08:54 AM
webguy330i
Evo How Tos / Installations
2
Apr 12, 2004 11:53 PM



Quick Reply: Need some help please



All times are GMT -7. The time now is 07:43 PM.