Lancer How To Requests / Questions / TipsIf you have any questions, post them in here.
Welcome to EvolutionM.net!
Welcome to EvolutionM.net.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
i've searched and searched again but i cant seem to find instructions with pictures of how to install ground wire kits...i hate spending money on shops to install something that in the end is easy to install even by myself...
__________________ "try and try...until it's perfect!"
"it's a bird... it's a pLane... no, it's a LANCER!"
OK...I just did this about a month ago and here's what I remembered from my custom grounding kit. Remember, this kit was made to connect end-to-end to the battery. Battery to factory grounding point near driver side chassis(any one will work). That to one of the couple bolts for the starter (another factory grounding point). That to the far right (driver side) coil screw (the ones that hold down the coil to the head cover). That to the far left coil screw. That to one of the mounting points for the alternator brackets. From that to a factory grounding point near the front-left portion of the head (near the plastic cam, etc. cover). That to a factory grounding point on the pass. side chassis (near, under, or around the A/C lines). Other than that...Good Luck.
Mission accomplished! Got the garage, and now it's time to play!!!
I have heard good things about ground fusion's grounding kits but I don't have any experience with it myself, so I couldn't really say myself, but I've read some threads and read nothing but good things about them.
__________________ "Is this the Lollipop factory, cause y'all a buncha SUCKAS!!!!" - Sage Francis
I've installed that same kit, although I only hooked up at the factory ground points. (only 4 points that I could see) I also installed a CAI at the same time, so I'm not sure as to what the gains are, but between the 2 I definately notice mid gains.
I guess the ignition is a little quicker to start the motor as well.
Soon I'll be adding a few more ground points, and I'll let you know if it helps/hurts anything.
does anyone know how to make a voltage stabilizer? and if so pm me please, im going to make a grounding kit and a voltage stabilizer for my auto ls. auto sucks bad, but this will help me, i hope, but for a couple bucks to make it all couldnt hurt