migs647

iTrader: (19)

This is a compiled list of SST Transmission coolers

AMS Performance Driver Side Mount Cooler


What's Included:
- One of the best oil coolers on the market
- Electric fan that easily wires into the factory fuse box
- Stainless steel brackets for long life and a seamless install
- All necessary hardware and wiring to install in the OEM location and to OEM lines

Retail: $519

ARC Cooler -- Need More Info and Picture
"Direct Replacement"

Blitz Cooler -- Need More Info and better Picture

"Complete kit with shields tandem"

GReddy Circuit Spec. SST Transmission Cooler Kit


Details:
This is a cooler that runs parallel with the factory cooler. It runs parallel to the ground, using under panel air for cooling.

What's Included:
- 160l/hr pump
- Lines
- Cooler
- LICP

Retail: $1650

HKS Cooler Front Mount Cooler

SST Oil Cooler Core Specs:
-200mm x 120mm x 32mm 9 row core
-Mounted in front of the radiator

What's included:
-SST Oil Pump
-Air Cooled Oil Cooler Core
-Misc. Hose
-Misc. Fitting
-Brackets
-Bolts and other Misc. Items

Other items needed but not included:
-SST Oil x 7L
-Wire (Able to work in temps exceeding 80 degrees Celsius) x 2m
-ON/OFF Switch x 1
-Relay (Approx. 200W Capability) x 1
-Fuse Holder (15A Capable)
-Terminals

Retail $1530

Road Race Engineering (RRE) -- Need more Info


Robi Spec Cooler -- Need More Info and Picture

SSP Performance Front Mount Cooler


What's included:
-High flow dual pass 6x16 oil cooler
-Single high flow 6" fan with shroud
-High flow 2.5 gpm oil pump
-6 AN high quality oil hose
-Complete wiring harness
-Heavy duty toggle switch
-Heavy duty fuse holder
-2 Banjo fittings
-2- 90 degree -6AN fittings
-2 -6AN straight fittings
-Assortment self tapping screws, and hardware

Retail: $850

I know there were some in production by HKS and Blitz, if you can add them to the threads I'll post them in this first post so everyone can see the compiled list.

gunzo

iTrader: (2)

This my DIYed setup ..

and track tested too

silthos

iTrader: (23)

Does it have a fan on it?

HB Speed

iTrader: (1)

Robispec makes one too

Coolant to oil cooler and air to oil :-p

migs647

iTrader: (19)

Have pics and specs on the Robispec?

Ti Carbon

Add HKS to the list

AJ PwR

The SSP one is simple and looks very efficient. Need better pics tho

migs647

iTrader: (19)

Yah I agree, I'm just scared of the price... heard $1k for it.

MACH3EVO

ok the BLITZ one is a complete kit with shields tandem

the HKS unit comes with a pump setup and a solinoid tandem

ARC about to release one as a direct replacment

migs647

iTrader: (19)

updated. Pics would be appreciated.

kozmic27

Gunzo's set up and the SSP setup are nearly identical, except that SSP mounts theirs on the right, which means it obviously possible to run two front mounts. Gunzo, How much trimming was required on the facia for your cooler to clear everything? I notice you spaced yours in front of the crash bar slightly, presumably to clear the a/c line?

gunzo

iTrader: (2)

0 trimming or cutting .. and it doesn't block the intake snorkel .. I'm quite sure the SSP unit got to cut something .. and the fan is really not needed in front unless you're not moving fast enough .. identical is the way to put it hehe .. should have never posted up the pics .. Anyways .. I got the idea from HKS .. so in a way I used HKS's idea too

Blitz Cooler require you to cut the front bumper beam and some other stuff .. its really weird ..

migs647

iTrader: (19)

Man, I actually like your set up more than the rest of them.

o7'silvermax

iTrader: (7)

what about these oil coolers to make some yourself http://www.cxracing.com/mm5/merchant...gory_Code=RDOC i know its all Chinese and seems very sketchy but hey some of their stuff is actually good

kozmic27

I have the ssp kit in my possesion atm, just havent gotten around to putting it in yet. I didn't think of you not having a fan, so I can see where it would fit no problem. The SSP kit comes with a template for drilling the bumper. It looks like a really nice kit.