SicLanEvo

iTrader: (11)

Okay I have read and read over and over the lowering thread on here. this thread is to only post confirmed lowered outlanders, with part numbers and specs. Anyone who has a lowered OS/ RVR/ ASX please give model, year, part number, any specs or actual measurements, pics. (If you are using different struts please provide the info as well)

Please only post up confirmed set ups! and I will add them to the original posts. Any questions PM me or email me at sic95gst@yahoo.com

SicLanEvo

iTrader: (11)

reserved 1

SicLanEvo

iTrader: (11)

reserved 2

SicLanEvo

iTrader: (11)

Ok So I have had to put my project on partial hold do to family issues and moving! Now things are coming back on track.... I am going to attempt the full evo X swap this week or weekend. Anyone who has successfully lowered their OS please message me the info and a pic. Year, Lowered on, any mods needed to make work, cost and measurements before and after would be awesome!!!!!!

ChrisHostos

iTrader: (1)

Evo X megan Race Springs front and back.
Front Top seats were changed to Evo X to hold in place.
2 coils cut off rear spring. Frotn installed as is.

Burtonrider1002

Great thread, and temporarily stickied.



Please keep all discussion and questions related to the setups in the following thread: https://www.evolutionm.net/forums/ou...-lowering.html

TEXAS TRAVISTY

Where did you get the EVO X top hats for the front struts so the Megan springs lined up perfectly? How hard was the swap on the stocl OS, and how much were they?
You said you cut 2 full coils off of the rears, how stiff is the rear susp. now?
Are you having any rubbing issues front or rear?
It all looks amazing and cant wait to have a simular set up soon.

TEXAS TRAVISTY

looks good, keep me informed!

Sosa33

iTrader: (1)

I like this sticky!! very useful.

TEXAS TRAVISTY

http://www.ebay.com/itm/Mitsubishi-ASX-RVR-and-Outlander-Sports-upgraded-coils-from-Delicashop-/261453344171?pt=AU_Car_Parts_Accessories&fits=Model%3AASX&hash=item3cdfd56dab&vxp=mtr
On the flip side anyone looking to get more ground clearance, raising the OS and making it more firm here is one option.

Evo 9 JDM

I think mitsubishi ASX is totally the same
Eibach have it
http://www.dcperformance.co.uk/uprat...bishi/asx.html

TEXAS TRAVISTY

I have been talking to Rob over at RRM and they had Eibach build a 1 of set of lowering spring for the O.S. that they turbo charged for Mitsubishi, he said if we were to call and email Eibach with request that they would most likely do a run of the springs for the O.S. since they already have the specs.
This would be the ride height

TEXAS TRAVISTY

after Google translate kicked in and some good searching foreign sites I found this...now where to buy???

ChrisHostos

iTrader: (1)

<<<@!1!@>>>


arent these the set that someone tried on the forum. with the red color OS. and we could barely notice a difference.

Ebay has these and H&R both.

eibach awd:
http://www.ebay.com/itm/Eibach-Pro-Kit-Lowering-Springs-Mitsubishi-ASX-GA-W-10-1-8-DI-D-1-8-DI-D-4WD-/230977590121?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35c7565369
H&R

http://www.ebay.com/itm/H-R-29035-4-Mitsubishi-ASX-Type-GA0-Sport-Springs-35mm-/111336326643?pt=Motors_Car_Truck_Parts_Accessories&hash=item19ec2985f3&vxp=mtr#ht_1624wt_1312

TEXAS TRAVISTY

These say GAO type 1.8lt Diesel awd, will that fit our 2.0 awd, pretty sure they can not be that different... 315.00 shipped is not bad at all!
Good find thanks!