Mark this thread as Unsold
FS[West]: (CA) 03 Evo 8 built 2.3 & fp black
Apr 28, 2015, 09:09 PM
#1
Evolving Member
Thread Starter
iTrader: (7)
Join Date: Sep 2004
Location: Irvine, CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
(CA) 03 Evo 8 built 2.3 & fp black
SOLD
No longer my daily driver, runs great no problems, clean title
Built 2.3 stroker
ran only brad penn 20w-50 oil
forced performance jb black turbo
manley 10.5:1 compression pistons
manley turbo tuff rods
1mm oversize valves
dual springs and retainers
4g64 crank
id 2000 injectors
buschur double pumper
bc 276 intake and exhaust cams
fidanza cam gears
zaklee clear cam cover
stm catch can
sparktech cop ignition
aem map sensor
ams 3.5 intercooler
buschur upper intercooler pipe
ets lower intercooler pipe
tial bov
apr front bumper (no mesh)
m3 rear spoiler strip
oem window visors
baer eradispeed slotted and dotted rotors
project mu front brake pads
ported intake manifold, mil.spec ported throttle body, and mil.spec ported exhaust manifold
odyssey mini battery and tray
invidia o2 housing and down pipe
straight pipe
buschur exhaust
torque solution engine mount and exhaust hangers
competition twin disc clutch
rebuilt tranny (9k miles ago with all new fluids that I did with the engine build)
aem air/fuel and boost gauges
pioneer head-unit
3m window tint
suspension related items (whiteline bushings, anti-roll bar, bump steer correction, front roll center adjustment, etc.) have been changed spent $1,700 from john mueller still have receipt http://www.muellerized.com/products_evo89.html
buddy club racing specs coilovers (muellerized adjusted and springs in the front are new)
enkei rpf-1 17x9.5 +38 rims with 20 mm spacers in the front with almost new (replaced in mid Feb.) Sumitomo HTR Z II 255/40/17 tires
530whp/480tq on e85. AC & heater work.
Issues are: 1) sunroof gets stuck but i never adjust it, 2) AC knob does not fully retract, 3) gas tank cover spring needs to be replaced, 4) stains on driver/passenger seats, 5) rear wiper blade broke but motor is fine i never use the wiper, 6) some tabs are broken on front bumper, 7) some indentation spots on rear panel near wheel as it was bought like this back in '06 don't know where it's from, 8) a couple of chips on apr front bumper.
No longer my daily driver, runs great no problems, clean title
Built 2.3 stroker
ran only brad penn 20w-50 oil
forced performance jb black turbo
manley 10.5:1 compression pistons
manley turbo tuff rods
1mm oversize valves
dual springs and retainers
4g64 crank
id 2000 injectors
buschur double pumper
bc 276 intake and exhaust cams
fidanza cam gears
zaklee clear cam cover
stm catch can
sparktech cop ignition
aem map sensor
ams 3.5 intercooler
buschur upper intercooler pipe
ets lower intercooler pipe
tial bov
apr front bumper (no mesh)
m3 rear spoiler strip
oem window visors
baer eradispeed slotted and dotted rotors
project mu front brake pads
ported intake manifold, mil.spec ported throttle body, and mil.spec ported exhaust manifold
odyssey mini battery and tray
invidia o2 housing and down pipe
straight pipe
buschur exhaust
torque solution engine mount and exhaust hangers
competition twin disc clutch
rebuilt tranny (9k miles ago with all new fluids that I did with the engine build)
aem air/fuel and boost gauges
pioneer head-unit
3m window tint
suspension related items (whiteline bushings, anti-roll bar, bump steer correction, front roll center adjustment, etc.) have been changed spent $1,700 from john mueller still have receipt http://www.muellerized.com/products_evo89.html
buddy club racing specs coilovers (muellerized adjusted and springs in the front are new)
enkei rpf-1 17x9.5 +38 rims with 20 mm spacers in the front with almost new (replaced in mid Feb.) Sumitomo HTR Z II 255/40/17 tires
530whp/480tq on e85. AC & heater work.
Issues are: 1) sunroof gets stuck but i never adjust it, 2) AC knob does not fully retract, 3) gas tank cover spring needs to be replaced, 4) stains on driver/passenger seats, 5) rear wiper blade broke but motor is fine i never use the wiper, 6) some tabs are broken on front bumper, 7) some indentation spots on rear panel near wheel as it was bought like this back in '06 don't know where it's from, 8) a couple of chips on apr front bumper.
Last edited by jbenosa; Oct 5, 2016 at 10:03 PM.
Apr 29, 2015, 09:44 AM
#3
3) gas tank cover spring needs to be replaced
4.66$ investment)) http://www.ebay.com/itm/GENUINE-MITS...-/271574816347
Sorry for Offtopic
4.66$ investment)) http://www.ebay.com/itm/GENUINE-MITS...-/271574816347
Sorry for Offtopic
Apr 30, 2015, 11:49 AM
#5
Evolving Member
Thread Starter
iTrader: (7)
Join Date: Sep 2004
Location: Irvine, CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
3) gas tank cover spring needs to be replaced
4.66$ investment)) http://www.ebay.com/itm/GENUINE-MITS...-/271574816347
Sorry for Offtopic
4.66$ investment)) http://www.ebay.com/itm/GENUINE-MITS...-/271574816347
Sorry for Offtopic
May 3, 2015, 09:10 PM
#6
FS posts on EVOM MUST INCLUDE:
PICTURE OF THE ITEM WITH A SIGN CONTAINING THE DATE AND YOUR EVOM USERNAME.
Price
Accurate description of item and its current condition.
Location of seller & Willingness to ship.
If applicable VIN number - Transmissions, Shortblocks, body parts which have VIN numbers on them. A picture of your username/date next to the visible VIN number is required. VIN should also be in the FS post in plain text.
PICTURE OF THE ITEM WITH A SIGN CONTAINING THE DATE AND YOUR EVOM USERNAME.
Price
Accurate description of item and its current condition.
Location of seller & Willingness to ship.
If applicable VIN number - Transmissions, Shortblocks, body parts which have VIN numbers on them. A picture of your username/date next to the visible VIN number is required. VIN should also be in the FS post in plain text.
