Mark this thread as Unsold
FS[Northeast]: NY/RI 2006 Evo IX SE 77k miles
#3
Evolved Member
Thread Starter
iTrader: (20)
Join Date: Mar 2009
Location: Big city, Bright lights
Posts: 2,389
Likes: 0
Received 11 Likes
on
10 Posts
the 60k service was done by Dynotech Tuning in Seekonk, MA at 61,150 miles. This trip to the shop was also when the clutch/flywheel/transmission were installed. The crew at Dynotech are the only people who have wrenched on the car besides me. They also did the O2 housing install.
#4
Evolved Member
Thread Starter
iTrader: (20)
Join Date: Mar 2009
Location: Big city, Bright lights
Posts: 2,389
Likes: 0
Received 11 Likes
on
10 Posts
added perrin intake and Grimmspeed 3 port EBC to the mods list.
Switched back to pump 93 last week and retooled the tune a little bit. Ive been on E85 for the majority of the last two years (stored for the winter after running 1 tank of pump gas and then a full fill with pump), and realized I never completely dialed in the pump gas tune.
Attached is a comparison of the pump and e85 "street" tunes (red line is e85, yellow is 93oct). Boost tables are identical on both tunes.
Switched back to pump 93 last week and retooled the tune a little bit. Ive been on E85 for the majority of the last two years (stored for the winter after running 1 tank of pump gas and then a full fill with pump), and realized I never completely dialed in the pump gas tune.
Attached is a comparison of the pump and e85 "street" tunes (red line is e85, yellow is 93oct). Boost tables are identical on both tunes.
Trending Topics
#13
Evolved Member
Thread Starter
iTrader: (20)
Join Date: Mar 2009
Location: Big city, Bright lights
Posts: 2,389
Likes: 0
Received 11 Likes
on
10 Posts
Only trying at this point, there's been zero interest. Prepping the car for #gridlife now, doubt it's gonna go anywhere. I just really want to import something.
#15
Evolved Member
Thread Starter
iTrader: (20)
Join Date: Mar 2009
Location: Big city, Bright lights
Posts: 2,389
Likes: 0
Received 11 Likes
on
10 Posts
since the car hasnt sold, i will be running at Gridlife at mid ohio in april. in preperation ive done the following:
- All driveline fluids changed using OEM fluids
- New spark plugs
- Custom oil cooler setup (koyo 15 row mounted in the nose between ic and a/c condenser)
- rebuilt front calipers and added wilwood bleeders
- increased rear spring rate (swift springs)
- built a straight pipe rear exhaust section (v band, cobb rear section can be swapped back on in 10 minutes)
- built custom rear alumalite rear diffuser
- arduino based ethanol content analyzer
- TSComptuned ACD tune
still a few more things to do...
- All driveline fluids changed using OEM fluids
- New spark plugs
- Custom oil cooler setup (koyo 15 row mounted in the nose between ic and a/c condenser)
- rebuilt front calipers and added wilwood bleeders
- increased rear spring rate (swift springs)
- built a straight pipe rear exhaust section (v band, cobb rear section can be swapped back on in 10 minutes)
- built custom rear alumalite rear diffuser
- arduino based ethanol content analyzer
- TSComptuned ACD tune
still a few more things to do...