Mark this thread as Sold
FS: Evo 8 machined bare clyinder head.
#1
Evolved Member
Thread Starter
iTrader: (171)
Join Date: Apr 2005
Location: Chandler, AZ
Posts: 1,216
Likes: 0
Received 0 Likes
on
0 Posts
FS: Evo 8 machined bare clyinder head.
I have an cylinder head that came off a 2003 evolution 8 with about 70k miles on it.
This cylinder head had the following machine work done to it:
- resurface
- two new valve seats
- Time-sert on #1 spark plug hole.
- valve job on just the valve seats
- glass bead and jet wash
The condition of the head is as follows:
- It has stock cast valve guides that are in good shape. I recommend that bronze valve guides be used for the future.
- The head has never been resurfaced before.
- All exhaust manifold studs and threaded holes are in good shape
- Camshaft surfaces and cam caps are in very good shape with no major scoring or gouges.
If the customer provides the valve train (valve, springs, retainers, seals, etc), a full valve job can be done, by my machine shop, for $150 extra. Bronze valve guides can be installed for an extra $80, labor only.
I am looking to get SOLD! for this head, and it will be shipped through fedex ground. Insurance is included.
http://i226.photobucket.com/albums/d...f/IMAG0568.jpg
http://i226.photobucket.com/albums/d...f/IMAG0569.jpg
http://i226.photobucket.com/albums/d...f/IMAG0570.jpg
http://i226.photobucket.com/albums/d...f/IMAG0571.jpg
http://i226.photobucket.com/albums/d...f/IMAG0572.jpg
This cylinder head had the following machine work done to it:
- resurface
- two new valve seats
- Time-sert on #1 spark plug hole.
- valve job on just the valve seats
- glass bead and jet wash
The condition of the head is as follows:
- It has stock cast valve guides that are in good shape. I recommend that bronze valve guides be used for the future.
- The head has never been resurfaced before.
- All exhaust manifold studs and threaded holes are in good shape
- Camshaft surfaces and cam caps are in very good shape with no major scoring or gouges.
If the customer provides the valve train (valve, springs, retainers, seals, etc), a full valve job can be done, by my machine shop, for $150 extra. Bronze valve guides can be installed for an extra $80, labor only.
I am looking to get SOLD! for this head, and it will be shipped through fedex ground. Insurance is included.
http://i226.photobucket.com/albums/d...f/IMAG0568.jpg
http://i226.photobucket.com/albums/d...f/IMAG0569.jpg
http://i226.photobucket.com/albums/d...f/IMAG0570.jpg
http://i226.photobucket.com/albums/d...f/IMAG0571.jpg
http://i226.photobucket.com/albums/d...f/IMAG0572.jpg
Last edited by elhalisf; Sep 6, 2012 at 07:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Phantom X Evo
Evo X Dyno Results
89
Apr 26, 2012 11:36 AM
SPIN2GST
For Sale - Cars For Sale
52
Sep 8, 2009 02:26 PM