Mark this thread as Unsold
[FS] injectors bosch motorsport
#1
Newbie
Thread Starter
injectors bosch motorsport
sell new injectors bosch motorsport 1000cc ( 400 $) 1700cc ( 500 $) 2200cc ( $ 500 ) injector spilled error of 0-2 % . EMS shipping
2200cc info
Coil Resistance: 9.1 Ohms
Flow Rates:
210 lbs/hr at 43.5 PSI, 2150 cc/min at 3.0 BAR
225 lbs/hr at 50.0 PSI, 2375 cc/min at 3.5 BAR
240 lbs/hr at 58.0 PSI, 2550 cc/min at 4.0 BAR
258 lbs/hr at 65.0 PSI, 2700 cc/min at 4.5 BAR
273 lbs/hr at 72.5 PSI, 2865 cc/min at 5.0 BAR
Latency (DEAD TIME TABLE):
1.430 ms, 8 volts;
1.153 ms, 10 volts;
0.930 ms, 12 volts;
0.750 ms, 14 volts;
0.570 ms, 16 volts;
0.390 ms, 18 volts
Acceptable: Gas, Petrol, Alcohol, Methanol, E85, CNG
1700cc info
High Impedance Injectors
Resistance: 9.1 Ohms
Latency: 0.45ms at 14 volts
Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 1700 cc/min = 160 lb/hr
Static Flow Rate @ 50 PSI ( 350kPa ) w/Gas: 1875 cc/min = 180 lb/hr
Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2000 cc/min = 195 lb/hr
Connector: Bosch EV1
O-Ring: 10.6mm Viton
Acceptable: Gas, Petrol, Alcohol, Methanol, E85, CNG
1000cc info
Flow Rate in CC per minute: 1150 CC/min @ 58 PSI
Flow Rate in LB per hour: 110 LBS/HR @ 58 PSI
Flow Rate in CC per minute: 980 CC/min @ 43.5 PSI
Flow Rate in LB per hour: 94 LBS/HR @ 43.5
Resistance: 12.8-14.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Sample Latency: 0.99 ms at 14 volts, 3 BAR
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
2200cc info
Coil Resistance: 9.1 Ohms
Flow Rates:
210 lbs/hr at 43.5 PSI, 2150 cc/min at 3.0 BAR
225 lbs/hr at 50.0 PSI, 2375 cc/min at 3.5 BAR
240 lbs/hr at 58.0 PSI, 2550 cc/min at 4.0 BAR
258 lbs/hr at 65.0 PSI, 2700 cc/min at 4.5 BAR
273 lbs/hr at 72.5 PSI, 2865 cc/min at 5.0 BAR
Latency (DEAD TIME TABLE):
1.430 ms, 8 volts;
1.153 ms, 10 volts;
0.930 ms, 12 volts;
0.750 ms, 14 volts;
0.570 ms, 16 volts;
0.390 ms, 18 volts
Acceptable: Gas, Petrol, Alcohol, Methanol, E85, CNG
1700cc info
High Impedance Injectors
Resistance: 9.1 Ohms
Latency: 0.45ms at 14 volts
Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 1700 cc/min = 160 lb/hr
Static Flow Rate @ 50 PSI ( 350kPa ) w/Gas: 1875 cc/min = 180 lb/hr
Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2000 cc/min = 195 lb/hr
Connector: Bosch EV1
O-Ring: 10.6mm Viton
Acceptable: Gas, Petrol, Alcohol, Methanol, E85, CNG
1000cc info
Flow Rate in CC per minute: 1150 CC/min @ 58 PSI
Flow Rate in LB per hour: 110 LBS/HR @ 58 PSI
Flow Rate in CC per minute: 980 CC/min @ 43.5 PSI
Flow Rate in LB per hour: 94 LBS/HR @ 43.5
Resistance: 12.8-14.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Sample Latency: 0.99 ms at 14 volts, 3 BAR
Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)
Thread
Thread Starter
Forum
Replies
Last Post
Seancj
Evo Engine / Turbo / Drivetrain
3
Jul 14, 2015 02:45 PM
finesse49ers
For Sale/WTB - Engine / Drivetrain / Power
13
May 1, 2013 09:15 AM
riceball777
Evo Engine / Turbo / Drivetrain
7
Mar 15, 2011 05:15 PM
Kevin Knight
Evo General
14
Jul 27, 2007 10:00 AM