11.96 @ 114.5 TT reflash, Stock turbo/Cams
#1
Evolving Member
Thread Starter
iTrader: (20)
Join Date: Nov 2004
Location: Detroit area
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
11.96 @ 114.5 TT reflash, Stock turbo/Cams
I just figured I should post my timeslips up here to Thank TurboTrix incase anyone missed them in the dragrace section.
The car has run 3, 11 second passes at two different tracks with numerous 12.0s
2005 EVO VIII
STOCK CAMS, STOCK TURBO, 100% STOCK ENGINE, OIL PAN TO VALVE COVER!
TurboTrix Reflash (mail in) Ported stock manifold, DC downpipe, Thermal Exhaust, MBC @ 22PSI, 93 Octane Pump gas, AEM intake, AMS intercooler, Samco Turbo Hoses.
Misc, ACT clutch & flywheel, TRE built trans, 255/40/17 Falken Azenis Rt-615 tires...........
Thanks Guys,
Mattj
The car has run 3, 11 second passes at two different tracks with numerous 12.0s
2005 EVO VIII
STOCK CAMS, STOCK TURBO, 100% STOCK ENGINE, OIL PAN TO VALVE COVER!
TurboTrix Reflash (mail in) Ported stock manifold, DC downpipe, Thermal Exhaust, MBC @ 22PSI, 93 Octane Pump gas, AEM intake, AMS intercooler, Samco Turbo Hoses.
Misc, ACT clutch & flywheel, TRE built trans, 255/40/17 Falken Azenis Rt-615 tires...........
Thanks Guys,
Mattj
#4
Evolving Member
Thread Starter
iTrader: (20)
Join Date: Nov 2004
Location: Detroit area
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
The TRE tranny is just my stock tanny rebuilt. The car is launched near 5200-5400 rpm.
The car is set-up for the road course, -3.5 frt and -1.4 rr degrees of camber...........The tires are great for a street/track combo but are not my first choice for the 1320.
The car is set-up for the road course, -3.5 frt and -1.4 rr degrees of camber...........The tires are great for a street/track combo but are not my first choice for the 1320.
#7
Evolved Member
iTrader: (1)
Join Date: Jun 2004
Location: Plano, TX
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
Astounding!! You're making what EVO IXs make with those mods.
Have you ever dyno'd the car? I would like to know what I need to make at the wheels with your setup to have a 114mph trapped car with stock cams.
Also, did you do any weight reduction?
-M
Have you ever dyno'd the car? I would like to know what I need to make at the wheels with your setup to have a 114mph trapped car with stock cams.
Also, did you do any weight reduction?
-M
Trending Topics
#9
Evolved Member
iTrader: (5)
Join Date: Aug 2005
Location: Florida
Posts: 1,878
Likes: 0
Received 0 Likes
on
0 Posts
You could have achieved the same goal much more easily, but none the less, you're going 11 with only TBE, intake, mail in flash, and a ported mani. I would say that's pretty awesome. Yes you have other mods, but they aren't helping you go faster at this point.
Last edited by KOEvo; May 23, 2006 at 12:27 PM.