TSComptuned New Service - Engine & Cylinder Head Building
#1
TSComptuned New Service - Engine & Cylinder Head Building
If anyone has any questions feel free to ask. tom@tscomptuned.net or PM me here or facebook.
Below are pictures of builds we have completed and documented:
By going to our facebook page here https://www.facebook.com/TSCOMPTUNED-293932917302897/ and clicking on albums, you can
see other documented assembly builds.
Last edited by tscompusa; Dec 8, 2016 at 06:05 PM.
#6
EvoM Guru
iTrader: (1)
That's excellent pricing on the short blocks. The forged 2.3L is about $2100 in just parts from ExtremePSI. The last 4 cylinder motor I built was $450 in just the machine shop bill for hot tank, bore/hone, line hone, and polish and balance a good used crank crank.
Are you getting the cranks balanced, Tom?
Are you getting the cranks balanced, Tom?
#7
Everything is rebalanced if it needs it. For additional cost we will do whatever the customer wants also. IE, put your flywheel/clutch on the entire rotating assembly and balance everything.
We also do full long blocks and ship them.
A lot of times we have customers buy new frontcases from us, we install the balance shaft eliminator stuff in it, install it, and that comes preinstalled with the short block for an additional $342, plus it comes prelubed/primed so the engine builds oil pressure instantly on first start.
We also install oil pans/pickups, trays, rear main seal, etc for those who don't want the responsibility in making sure if their pan seals or not.
We also do full long blocks and ship them.
A lot of times we have customers buy new frontcases from us, we install the balance shaft eliminator stuff in it, install it, and that comes preinstalled with the short block for an additional $342, plus it comes prelubed/primed so the engine builds oil pressure instantly on first start.
We also install oil pans/pickups, trays, rear main seal, etc for those who don't want the responsibility in making sure if their pan seals or not.