MAPerformance SHOP EVO PART OUT! 2.4L, Dry Sump, Dogbox, Brakeman, Turbo Kit!
#1
MAPerformance SHOP EVO PART OUT! 2.1L with Dry Sump, Dogbox, Brakeman, Turbo Kit!
Hey guys,
Hard decision for us to make, but we decided. We are parting out our EVO 8 shop car, here is a quick link and some videos of the car in question!
http://www.maperformance.com/custome...-map-evo-viii/
On top of the parts that will be listed below, eventually we will have a rolling shell ready to go as well.
Onto the list of parts! PICTURES COMING VERY SOON!
Engine:
Coming soon!
-MAP/Jacks Beast Mode EVO 8 NON-ACD Transfer Case w/ RS Differential
This rebuild includes:
MAP Hardened + REM ISF Micropolished ring and pinion gear-set
Bearings
Upgrading the case bolts from 8MM to 10MM to prevent case and gear breakage
Tighter bearing pre-loads
New seals and o-rings (excludes ACD piston seals)
Complete tear down and cleaning using state -of-the-art equipment HERE
Removal of all pinion shims to square up the assemblies more accurately. This will prevent any shifting or movement under extreme conditions
(Click here for more information)
$3000.00
-Brake Man Front Drag Brake Kit
#82 Brake Pads
about 10 passes on brake kit
$1600.00
-Brake Man Rear Drag Brake Kit
#82 Brake Pads
about 10 passes on brake kit
$1200.00
-CBRE Ceramic Wheel Bearings - Front and Rear
about 10 passes on brake kit
$1450.00
-Sparktech EVO 8 CDI COP Sequential
Wrinkle black plate
Polish billet coil covers
M&W Pro-14 CDi Box
$1200.00
Willing to offer the turbo kit complete, but willing to separate. Will require some modification to your car, as we didn't build this around stock core support.
Custom MAPerformance T4 Divided Top Mount Manifold w/ Hood Exit downpipe and dump tubes
Precision 7675 Ball Bearing Turbo
2x Turbosmart Hypergate 45 Wastegates
Kit - $2950.00
If you are interested in the Turbo Kit parts above separate please see pricing below:
Custom MAPerformance T4 Divided Top Mount Manifold w/ Hood Exit downpipe and dump tubes - $1100.00
Precision 7675 Ball Bearing Turbo - $1450.00
2x Turbosmart Hypergate 45 Wastegates - $200.00 a piece
NEW ADDITION!!!
MAP Race Prepped Long Block with MAP Dry Sump Kit
Main components: MAP Stage 2 2.1L Shortblock and MAP Stage 5 Head with MAP Dry Sump Kit
This engine was built for the 2014 season but, due to our hectic schedule, the car never actually made a single pass through the season. This engine was run on the dyno for to clean up the tune after the rebuild and has approximately 10-14 full power pulls as a result. The engine was also used to do some R&D testing that required some additional lighter power pulls. After concluding the most recent tuning session, the crank was removed and an OEM 88mm crank, precision polished and balanced, was installed with new ACL Race Bearings. This engine is now complete, ready to drop in and includes the following components:
MAP Stage 2 2.1 Liter Shortblock with Core: (Retail: 3624.99)
Wiseco Pistons: K626M87AP: Wiseco 1400HD 87MM Piston Set 9.8:1 Compression Ratio
MAP 156MM Rev2 Ultimate Duty Connecting Rods
OEM Mitsubishi Crank - Precision polished and balanced
ACL Race Bearings
MAP Water Pump Adapter Plate
MAP Supplied OEM Mitsubishi 4G64 Block with OEM 4G63 Crank
MAP Stage 5 EVO 8 Head with Core: (Retail: 3282.44)
Combustion Chambers matched to 87mm 4G64 Block
Supertech +1mm Intake Valves with +1mm Inconnel Exhaust Valves
Supertech Valve Seals
Ferrea Valve Guides
GSC Springs and Retainers
MAP Supplied Core
MAP Exhaust Manifold and Stud Kit
MAPerformance Dry Sump System for Evolution 8 & 9 (Retail: 4240.99)
Longblock components:
Valve Cover: (Retail: 459.38)
AEM Adjustable Cam Gears: (Retail: 130.27 x 2 = 260.54)
MAP Timing Belt Kit with Gates Racing Belt and OEM Water Pump: (Retail: 582.99)
Custom Kelford 294 degree Cams: (Retail: 620.00)
Power Enterprise Headgasket: (Retail: 264.99)
OEM Mitsubishi Crank Position Sensor: (Retail: 109.15)
MAP Ultimate Duty Headstuds: (Retail: 249.99)
ITM Lifters: (Retail: 94.99)
Assembly to Long Block: (Retail: 800.00)
Degree top end into bottom end: (Retail: 300.00)
I am sure there are several components I am forgetting/missing in this list but everything pictured will be included except the alternator!
This engine is sold as used but has been freshened up and is ready to be dropped in!
Total Retail Cost for this entire package would normally be: $14890.45
Buy it now and we will ship this engine out anywhere in the 48 contiguous states for 9999.00!!!!!
Adam Brunson
Sales Manager
651-348-8811 EXT 113
Adam@maperformance.com
Hard decision for us to make, but we decided. We are parting out our EVO 8 shop car, here is a quick link and some videos of the car in question!
http://www.maperformance.com/custome...-map-evo-viii/
On top of the parts that will be listed below, eventually we will have a rolling shell ready to go as well.
Onto the list of parts! PICTURES COMING VERY SOON!
Engine:
Coming soon!
-MAP/Jacks Beast Mode EVO 8 NON-ACD Transfer Case w/ RS Differential
This rebuild includes:
MAP Hardened + REM ISF Micropolished ring and pinion gear-set
Bearings
Upgrading the case bolts from 8MM to 10MM to prevent case and gear breakage
Tighter bearing pre-loads
New seals and o-rings (excludes ACD piston seals)
Complete tear down and cleaning using state -of-the-art equipment HERE
Removal of all pinion shims to square up the assemblies more accurately. This will prevent any shifting or movement under extreme conditions
(Click here for more information)
$3000.00
-Brake Man Front Drag Brake Kit
#82 Brake Pads
about 10 passes on brake kit
$1600.00
-Brake Man Rear Drag Brake Kit
#82 Brake Pads
about 10 passes on brake kit
$1200.00
-CBRE Ceramic Wheel Bearings - Front and Rear
about 10 passes on brake kit
$1450.00
-Sparktech EVO 8 CDI COP Sequential
Wrinkle black plate
Polish billet coil covers
M&W Pro-14 CDi Box
$1200.00
Willing to offer the turbo kit complete, but willing to separate. Will require some modification to your car, as we didn't build this around stock core support.
Custom MAPerformance T4 Divided Top Mount Manifold w/ Hood Exit downpipe and dump tubes
Precision 7675 Ball Bearing Turbo
2x Turbosmart Hypergate 45 Wastegates
Kit - $2950.00
If you are interested in the Turbo Kit parts above separate please see pricing below:
Custom MAPerformance T4 Divided Top Mount Manifold w/ Hood Exit downpipe and dump tubes - $1100.00
Precision 7675 Ball Bearing Turbo - $1450.00
2x Turbosmart Hypergate 45 Wastegates - $200.00 a piece
NEW ADDITION!!!
MAP Race Prepped Long Block with MAP Dry Sump Kit
Main components: MAP Stage 2 2.1L Shortblock and MAP Stage 5 Head with MAP Dry Sump Kit
This engine was built for the 2014 season but, due to our hectic schedule, the car never actually made a single pass through the season. This engine was run on the dyno for to clean up the tune after the rebuild and has approximately 10-14 full power pulls as a result. The engine was also used to do some R&D testing that required some additional lighter power pulls. After concluding the most recent tuning session, the crank was removed and an OEM 88mm crank, precision polished and balanced, was installed with new ACL Race Bearings. This engine is now complete, ready to drop in and includes the following components:
MAP Stage 2 2.1 Liter Shortblock with Core: (Retail: 3624.99)
Wiseco Pistons: K626M87AP: Wiseco 1400HD 87MM Piston Set 9.8:1 Compression Ratio
MAP 156MM Rev2 Ultimate Duty Connecting Rods
OEM Mitsubishi Crank - Precision polished and balanced
ACL Race Bearings
MAP Water Pump Adapter Plate
MAP Supplied OEM Mitsubishi 4G64 Block with OEM 4G63 Crank
MAP Stage 5 EVO 8 Head with Core: (Retail: 3282.44)
Combustion Chambers matched to 87mm 4G64 Block
Supertech +1mm Intake Valves with +1mm Inconnel Exhaust Valves
Supertech Valve Seals
Ferrea Valve Guides
GSC Springs and Retainers
MAP Supplied Core
MAP Exhaust Manifold and Stud Kit
MAPerformance Dry Sump System for Evolution 8 & 9 (Retail: 4240.99)
Longblock components:
Valve Cover: (Retail: 459.38)
AEM Adjustable Cam Gears: (Retail: 130.27 x 2 = 260.54)
MAP Timing Belt Kit with Gates Racing Belt and OEM Water Pump: (Retail: 582.99)
Custom Kelford 294 degree Cams: (Retail: 620.00)
Power Enterprise Headgasket: (Retail: 264.99)
OEM Mitsubishi Crank Position Sensor: (Retail: 109.15)
MAP Ultimate Duty Headstuds: (Retail: 249.99)
ITM Lifters: (Retail: 94.99)
Assembly to Long Block: (Retail: 800.00)
Degree top end into bottom end: (Retail: 300.00)
I am sure there are several components I am forgetting/missing in this list but everything pictured will be included except the alternator!
This engine is sold as used but has been freshened up and is ready to be dropped in!
Total Retail Cost for this entire package would normally be: $14890.45
Buy it now and we will ship this engine out anywhere in the 48 contiguous states for 9999.00!!!!!
Adam Brunson
Sales Manager
651-348-8811 EXT 113
Adam@maperformance.com
Last edited by maperformance; Feb 5, 2015 at 03:01 PM.
#4
Let me know if you have any other questions!
Thank you,
Adam Brunson